Index - Traditional Index

A

A/C-ECU
Removal and installation55-129
ABS, ASC, acd, ayc and s-awc(M/T)90-244
ABS, ASC, acd, ayc and s-awc (tc-sst)90-254
Accessory socket
General information54A-270
Removal and installation54A-270
Accessory socket and cigarette lighter90-242
Adjustment snap ring and spacers22B-6
Air bag module and seat belt pre-tensioner disposal procedures52B-417
Air cleaner
Removal and installation15-10
Air conditioning system90-190
Ambient temperature sensor
Inspection55-127
Removal and installation55-127
Amplifier
General information54A-568
Removal and installation54A-569
Antenna
General information54A-566
Removal and installation54A-567
ASC off switch
Inspection35C-271
Removal and installation35C-271
Audio system (vehicles with audio amplifier)90-216
Audio system (vehicles without audio amplifier)90-210
Auto A/C diagnosis
Actuator test55-109
Check at A/C-ECU terminal55-109
Data list reference table55-105
Diagnostic function55-7
Diagnostic trouble code chart55-9
Diagnostic trouble code procedures
DTC B1000: control panel communication error55-13
DTC B1003: mode dial sw error55-17
DTC B1018: temperature control dial sw error55-21
DTC B1021: fan dial sw error55-24
DTC B1031, B1032: fin thermo sensor system55-27
DTC B1034, B1035: ambient air temperature sensor system55-30
DTC B1079: refrigerant leaks55-33
DTC b10c0, b10c1: interior temperature sensor system55-10
DTC B2214: control panel failure55-37
DTC b223b: control panel improperly assembled55-41
DTC U0019: bus off (can1)55-46
DTC U0141: ETACS-ECU time-out55-47
DTC U0151: SRS-ECU time-out55-50
DTC U0154: occupant classification ECU time out55-52
DTC U0155: combination meter time-out55-55
DTC U0168: wcm time-out55-58
DTC U0184: audio time-out55-60
DTC U0195: satellite radio tuner CAN timeout55-63
DTC U0197: hands free module time-out55-65
DTC U0245: audio visual navigation unit CAN timeout55-68
DTC U1415: coding not completed55-44
Heater, A/C and ventilation diagnostic troubleshooting strategy55-6
Introduction to heater, A/C and ventilation diagnosis55-6
Symptom chart55-71
Symptom procedures
Inspection procedure 1: when the A/C is operation, temperature inside the passenger compartment does not decrease (cool air is not emitted)55-72
Inspection procedure 2: malfunction of the A/C-ECU power supply system55-74
Inspection procedure 3: the compressor does not work.55-78
Inspection procedure 4: blower fan and motor do not turn.55-85
Inspection procedure 5: blower air amount cannot be changed55-90
Inspection procedure 6: outside/inside air changeover is not possible55-93
Inspection procedure 7: A/C outlet air temperature does not increase55-95
Inspection procedure 8: air outlet vent cannot be changed. 55-98
Inspection procedure 9: blower motor power supply system55-101
Auto-cruise control
Auto-cruise control switch
Removal and installation17-69
Auto-cruise control system diagnosis
Diagnostic function17-10
Diagnostic troubleshooting strategy17-10
Introduction to cruise control system diagnosis17-10
Data list reference table17-59
Diagnostic trouble code chart17-13
Diagnostic trouble code procedures
DTC 15: cruise control switch system17-14
DTC 22: stoplight switch system17-27
DTC 23: ECM and its related component17-36
ECM terminal voltage reference chart for cruise control system operation17-60
General information17-9
On-vehicle service Cruise control switch check17-65
Cruise control system component check17-67
Special tools17-63
Symptom chart17-38
Symptom procedures
Inspection procedure 1: when the brake pedal is depressed, cruise control system is not cancelled.17-38
Inspection procedure 2: when the clutch pedal is depressed, cruise control system is not cancelled (M/T)17-41
Inspection procedure 3: when the shift lever is moved to N position, cruise control system is not cancelled (tc-sst)17-44
Inspection procedure 4: when the cruise control CANCEL switch is set to on, cruise control system is not cancelled.17-47
Inspection procedure 5: cruise control cannot be set (coast/set or acc/res switch operation is not available).17-48
Inspection procedure 6: hunting (repeated acceleration and deceleration) occurs at the set vehicle speed17-53
Inspection procedure 7: when on/off switch is turned on, CRUISE indicator light inside combination meter does not illuminate (however, cruise control system is normal)17-56
Auto-cruise control system (M/T)90-276
Auto-cruise control system (tc-sst)90-282
Awc-ECU
Removal and installation
Manual transaxle22A-132
Twin clutch-sportronic shift transmission (tc-sst)22C-349

B

Backup light (M/T)90-134
Backup light (sst)90-136
Basic brake system diagnosis
Basic brake system diagnostic troubleshooting strategy35A-4
Introduction to basic brake system diagnosis35A-4
Symptom chart35A-4
Symptom procedures
Inspection procedure 1: vehicle pulls to one side when brakes are applied35A-5
Inspection procedure 2: insufficient braking power35A-5
Inspection procedure 3: increased pedal stroke(reduced floor board clearance)35A-6
Inspection procedure 4: brake drag35A-7
Inspection procedure 5: scraping or grinding noise when brakes are applied35A-8
Inspection procedure 6: squealing, groaning or chattering noise when brakes are applied35A-9
Inspection procedure 7: squealing noise when brakes are not applied35A-10
Inspection procedure 8: groaning, clicking or rattling noise when brakes are not applied35A-11
Battery
General information54A-7
On-vehicle service
Battery test54A-9
Charging54A-8
Electrolyte level and specific gravity checks54A-8
Removal and installation54A-10
Brake pedal
Inspection
Brake pedal distortion check35A-26
Stoplight switch check35A-26
Removal and installation35A-25
Brake warning light, fuel warning light and oil pressure warning light (M/T)90-148
Brake warning light, fuel warning light and oil pressure warning light (tc-sst)90-152

C

Camshaft
Inspection11B-44
Removal and installation
Engine mechanical11A-25
Engine overhaul11B-41
CAN related DTC (code) table54C-240
Center differential
Disassembly and assembly22B-53
Central door locking system90-162
Centralized junction90-20
Charge air cooler
Removal and installation15-15
Charging system
Charging system diagnosis16-3
General information16-2
General specifications16-3
Generator assembly
Disassembly and assembly16-16
Inspection16-20
Removal and installation16-14
On-vehicle service
Generator output line voltage drop test16-7
Output current test16-8
Regulated voltage test16-10
Wave pattern check using an oscilloscope16-11
Service specifications16-3
Special tool16-6
Charging system (M/T)90-44
Charging system (sst)90-48
Cigarette lighter
Inspection54A-271
Removal and installation54A-271
Clutch
Inspection21B-6
Removal and installation21B-4
Clutch control
Inspection21A-10
Removal and installation21A-8
Clutch housing
Disassembly and assembly22B-44
Clutch pedal and master cylinder
Inspection
Clutch switch check and adjustment21A-7
Interlock switch operating check21A-7
Removal and installation21A-4
Clutch release cylinder
Disassembly and assembly21B-7
Inspection21B-9
Column switch
Diagnostic trouble code procedures
DTC B2350: lighting switch DTC B2351: wiper switch54A-276
General information54A-272
Inspection
Column switch (switch body part) continuity check54A-280
Wiper/washer switch continuity check54A-279
Removal and installation54A-278
Special tools54A-273
Troubleshooting
Diagnostic function54A-274
Diagnostic trouble code table54A-276
Standard flow of diagnostic troubleshooting54A-274
Combination meter
Actuator test table54A-82
Check at ECU terminals54A-88
Check procedure for each multi information display screen54A-82
Combination meter
Disassembly and assembly54A-102
Removal and installation54A-101
Diagnostic trouble code chart54A-28
Diagnostic trouble code procedures
DTC B1200: malfunction of odometer54A-29
DTC B1201: abnormal fuel information54A-30
DTC B1208: malfunction of lcd heater54A-33
DTC B1209: test mode54A-34
DTC B2203: vin not programmed54A-35
DTC B2463: the sticking of rheostat switch54A-36
DTC B2464: the sticking of multi information meter switch54A-38
DTC B2465: ignition switch signal error54A-40
DTC U0019: bus off (b)54A-42
DTC U0100: engine control module CAN timeout54A-43
DTC U0141: ETACS CAN timeout54A-45
DTC U0151: ECU CAN timeout54A-47
DTC U0154: occupant ECU CAN timeout54A-48
DTC U0164: A/ECU CAN timeout54A-50
DTC U0168: ECU or wcm CAN timeout54A-51
DTC U0184: audio CAN timeout54A-53
DTC U0197: hands free module CAN timeout54A-54
DTC U0245: audio visual navigation unit CAN timeout54A-56
DTC U1415: coding not completed/data fail54A-57
On-vehicle service
Fuel level sensor check54A-91
Multi information meter switch check54A-92
Service reminder function set54A-93
Speedometer check54A-89
Tachometer check54A-91
Service data54A-78
Service specifications54A-23
Special tools54A-24
Symptom procedures
Inspection procedure 1: power supply circuit check.54A-60
Inspection procedure 2: the speedometer does not work (the other meters work)54A-65
Inspection procedure 3: the tachometer does not work (the other meters work)54A-67
Inspection procedure 4: tone alarm does not sound normally54A-69
Inspection procedure 5: the combination meter light does not illuminate normally or the multi information display is not displayed normally54A-72
Inspection procedure 6: the multi information display screen cannot be changed with the operation of the multi information meter switch.54A-75
Trouble symptom chart54A-59
Troubleshooting
Diagnosis function54A-25
Standard flow of diagnostic troubleshooting54A-25
Compressor assembly and tension pulley
Disassembly and assembly55-132
Inspection
Heater, air conditioning and ventilation55-132
Heater, air conditioning and ventilation55-134
Removal and installation55-130
Condenser assembly
Removal and installation55-135
Control housing
Disassembly and assembly22B-40
Control link and lower arm
Control link ball joint dust cover inspection34-15
Control link ball joint dust cover replacement34-16
Control link ball joint rotation starting torque check34-14
Control link slide bushing rotation starting torque check34-15
Lower arm pillow ball bushing rotation starting torque check34-15
Removal and installation34-12
Control unit70-4
Controller area network (CAN) (M/T)90-358
Controller area network (CAN) (sst)90-362
Coolant14-3
Cooling system90-76
Crankshaft and cylinder block
Inspection11B-76
Removal and installation11B-71
Crankshaft oil seal
Removal and installation11A-54
Crankshaft pulley
Removal and installation11A-21
Curtain air bag module(s)
Inspection52B-412
Removal and installation52B-409
Cylinder head and valves
Inspection11B-52
Removal and installation11B-47
Cylinder head gasket
Removal and installation11A-57

D

Dash panel
Configuration diagrams80A-10
Splice locations80B-5
Daytime running light (drl) (discharge type)90-110
Daytime running light (drl) (halogen type)90-106
Defogger
General information54A-713
On-vehicle service
Printed heater check54A-724
Rear window defogger relay check54A-724
Removal and installation54A-723
Special tools54A-713
Symptom procedures
Rear window defogger does not operate54A-715
Troubleshooting
Standard flow of diagnostic troubleshooting54A-714
Symptom chart54A-714
Diagnosis
ABS warning light and brake warning light inspection35C-7
Actuator test reference table35C-257
Actuator test table42B-171
ASC diagnostic troubleshooting strategy35C-6
CAN bus diagnostics
Diagnostic item 1: diagnose when the scan tool cannot receive the data sent by ECU54C-27
Diagnostic item 10: diagnose when the scan tool cannot receive the data sent by ECM54C-104
Diagnostic item 11: diagnose when the scan tool cannot receive the data sent by ECU. (sst)54C-109
Diagnostic item 12: diagnose the lines between the ECU and joint connector (can2)54C-112
Diagnostic item 13: diagnose the lines between joint connector (can2) and joint connector (can3)54C-117
Diagnostic item 14: diagnose the lines between joint connector (can3) and joint connector (can4). (sst)54C-121
Diagnostic item 15: diagnose when the scan tool cannot receive the data sent by ECU54C-124
Diagnostic item 16: diagnose when the scan tool cannot receive the data sent by wcm54C-127
Diagnostic item 17: diagnose when the scan tool cannot receive the data sent by ECU54C-130
Diagnostic item 18: diagnose when the scan tool cannot receive the data sent by occupant ECU54C-133
Diagnostic item 19: diagnose when the scan tool cannot receive the data sent by A/ECU54C-136
Diagnostic item 2: malfunction of the ECU54C-32
Diagnostic item 20: diagnose when the scan tool cannot receive the data sent by radio and cd player or cd changer54C-139
Diagnostic item 21: diagnose when the scan tool cannot receive the data sent by CAN box unit54C-142
Diagnostic item 22: diagnose when the scan tool cannot receive the data sent by satellite radio tuner54C-145
Diagnostic item 23: diagnose when the scan tool cannot receive the data sent by hands free module54C-148
Diagnostic item 24: diagnose when the scan tool cannot receive the data sent by combination meter54C-151
Diagnostic item 25: short to power supply or ground in both CAN_h and CAN_l lines of the b bus lines.54C-154
Diagnostic item 26: diagnose the ECU, joint connector (can1) or lines between ECU and joint connector (can1)54C-190
Diagnostic item 27: short to power supply or ground, open circuit or line short in the b bus lines. Diagnostic item 3: abnormal short between the c bus lines54C-33
Diagnostic item 4: diagnose shorts in the ground to c bus line54C-50
Diagnostic item 5: diagnose shorts in the power supply to c bus line54C-70
Diagnostic item 6: diagnose when the scan tool cannot receive the data sent by ECU54C-89
Diagnostic item 7: diagnose when the scan tool cannot receive the data sent by steering wheel sensor.54C-93
Diagnostic item 8: diagnose when the scan tool cannot receive the data sent by shift lever. (sst)54C-97
Diagnostic item 9: diagnose when the scan tool cannot receive the data sent by ECU54C-100
CAN bus diagnostics table54C-14
related connector position54C-25
Check at ECU terminals
Active skid control system (ASC)35C-259
Wireless control module (wcm)42C-113
Data list reference table
Active skid control system (ASC)35C-255
Keyless operation system (kos)42B-170
Wireless control module (wcm)42C-83
Diagnostic function
Active skid control system (ASC)35C-8
Keyless operation system (kos)42B-10
Wireless control module (wcm)42C-6
Diagnostic trouble code chart
Active skid control system (ASC)35C-20
Keyless operation system (kos)42B-20
Wireless control module (wcm)42C-14
Diagnostic trouble code procedures
Code No.U1417 implausible coding data42B-167
DTC B1731: engine control module communication timeout
Keyless operation system (kos)42B-22
Wireless control module (wcm)42C-16
DTC B1761: vin code not programmed
Keyless operation system (kos)42B-24
Wireless control module (wcm)42C-18
DTC b1a08: keyless/kos key1 performanceDTC b1a09: keyless/kos key2 performanceDTC b1a0a: keyless/kos key3 performanceDTC b1a0b: keyless/kos key4 performance42B-26
DTC b1a08: keyless/kos key1 performanceDTC b1a09: keyless/kos key2 performanceDTC b1a0a: keyless/kos key3 performanceDTC b1a0b: keyless/kos key4 performanceDTC b1a0c: keyless key 5 performanceDTC b1a42C-19
DTC b1a10: keyless/kos key 1 low batteryDTC b1a11: keyless/kos key 2 low batteryDTC b1a12: keyless/kos key 3 low batteryDTC b1a13: keyless/kos key 4 low battery42B-27
DTC b1a10: keyless/kos key 1 low batteryDTC b1a11: keyless/kos key 2 low batteryDTC b1a12: keyless/kos key 3 low batteryDTC b1a13: keyless/kos key 4 low batteryDTC b1a14: keyless key 5 low batteryDTC42C-21
DTC b1a24: key id not registered
Keyless operation system (kos)42B-28
Wireless control module (wcm)42C-22
DTC b1a25: key id unmatched
Keyless operation system (kos)42B-29
Wireless control module (wcm)42C-23
DTC b1a28: engine control module authenticate error
Keyless operation system (kos)42B-31
Wireless control module (wcm)42C-25
DTC b1a35: transponder read error
Keyless operation system (kos)42B-33
Wireless control module (wcm)42C-27
DTC B2101: ig sw start pos.circuit lowDTC B2102: ig sw start pos.circuit high
Keyless operation system (kos)42B-36
Wireless control module (wcm)42C-30
DTC B2204: coding data mismatch
Keyless operation system (kos)42B-39
Wireless control module (wcm)42C-33
DTC B2206: vin code mismatch
Keyless operation system (kos)42B-41
Wireless control module (wcm)42C-35
DTC B2352: antenna fail
Keyless operation system (kos)42B-43
Wireless control module (wcm)42C-37
DTC B2400: kos key registration fail42B-49
DTC B2401: keyless/kos key id not register42C-38
DTC B2401: keyless/kos key id not registered42B-60
DTC B2402: stl unit comm.(system id)DTC
B2403: stl unit comm.(crc)DTC B2404: stl unit comm. (function code)DTC B2405: stl unit comm.(rolling code) DTC B2406: stl unit comm.(ptc operate)DTC B2407: stl unit comm.(EEPROM42B-62
DTC B2409 stl unit comm.(No response)42B-67
DTC b240a: fr antenna(outdoor) open42B-72
DTC b240b: fl antenna(outdoor) open42B-78
DTC b240c: tail gate antenna(outdoor) open42B-84
DTC b240d: front antenna(indoor) open42B-90
DTC B2410: rear antenna(indoor) open42B-95
DTC B2412: lf antenna power voltage42B-101
DTC B2413: stl unit power voltage42B-108
DTC B2414: unlock sensor fail42B-111
DTC B2415: ra module power voltage
Keyless operation system (kos)42B-118
Wireless control module (wcm)42C-39
DTC B2416: ECU internal error
Keyless operation system (kos)42B-129
Wireless control module (wcm)42C-44
DTC C1000: abnormality in stoplight switch circuit35C-140
DTC c100a: abnormality in fl wheel speed sensor circuit35C-23
DTC C1011: abnormality in fl wheel speed sensor signal35C-43
DTC C1014: mutual monitoring of fl wheel speed sensor35C-68
DTC C1015: abnormality in fr wheel speed sensor circuit35C-28
DTC c101c: abnormality in fr wheel speed sensor signal35C-49
DTC c101f: mutual monitoring of fr wheel speed sensor35C-72
DTC C1020: abnormality in rl wheel speed sensor circuit35C-33
DTC C1027: abnormality in rl wheel speed sensor signal35C-55
DTC c102a: mutual monitoring of rl wheel speed sensor35C-75
DTC c102b: abnormality in rr wheel speed sensor circuit35C-38
DTC C1032: abnormality in rr wheel speed sensor signal35C-62
DTC C1035: mutual monitoring of rr wheel speed sensor35C-79
DTC C1041: abnormality in periodical signal for fl wheel speed sensor35C-82
DTC C1042: abnormality in periodical signal for fr wheel speed sensor35C-85
DTC C1043: abnormality in periodical signal for rl wheel speed sensor35C-87
DTC C1044: abnormality in periodical signal for rr wheel speed sensor35C-90
DTC C1046: fl wheel speed sensor control phase time exceeded35C-92
DTC C1047: fr wheel speed sensor control phase time exceeded35C-98
DTC C1048: rl wheel speed sensor control phase time exceeded35C-104
DTC C1049: rr wheel speed sensor control phase time exceeded35C-110
DTC c104b: abnormality in fl wheel inlet valve system, DTC c104f: abnormality in fr wheel inlet valve system, DTC C1053: abnormality in rl wheel inlet valve system, DTC C1057: abnormality in rr wheel inlet valve system, DTC c105f:35C-116
DTC C1073: faulty motor drive circuit35C-122
DTC C1210: abnormality in g and yaw rate sensor (longitudinal g sensor)35C-167
DTC C1219: abnormality in steering wheel sensor signal35C-184
DTC c121a: abnormality in steering wheel sensor initialization35C-187
DTC c121c: torque request signal rejection35C-157
DTC c121d: abnormality in brake fluid pressure sensor circuit35C-130
DTC c121e: abnormality in brake fluid pressure sensor output signal35C-132
DTC c123a: abnormality in sensor calibration35C-182
DTC c123b: prolonged operation of ASC35C-146
DTC c123c: abnormality in g and yaw rate sensor (lateral g or yaw rate)35C-171
DTC C1242: abnormality in g and yaw rate sensor (longitudinal g sensor)35C-169
DTC C1290: CAN out error35C-159
DTC C1395: brake fluid filling not completed35C-156
DTC C1608: EEPROM error
Keyless operation system (kos)42B-130
Wireless control module (wcm)42C-45
DTC C1608: implausible diagnosis data35C-190
DTC C1900: No registration
Keyless operation system (kos)42B-131
Wireless control module (wcm)42C-46
DTC C1901: vehicle speed information abnormality
Keyless operation system (kos)42B-132
Wireless control module (wcm)42C-47
DTC C1910: transmitter low battery voltage abnormality 1, DTC C1920: transmitter low battery voltage abnormality 2, DTC C1930: transmitter low battery voltage abnormality 3, DTC C1940: transmitter low battery voltage abnormality 4
Keyless operation system (kos)42B-134
Wireless control module (wcm)42C-49
DTC C1912: tire inflation pressure warning 1, DTC C1922: tire inflation pressure warning 2, DTC C1932: tire inflation pressure warning 3, DTC C1942: tire inflation pressure warning 4
Keyless operation system (kos)42B-144
Wireless control module (wcm)42C-58
DTC C1913: acceleration sensor abnormality 1, DTC C1923: acceleration sensor abnormality 2, DTC C1933: acceleration sensor abnormality 3, DTC C1943: acceleration sensor abnormality 4, DTC C1914: pressure sensor abnormality 1
Keyless operation system (kos)42B-142
Wireless control module (wcm)42C-56
DTC C1915: transmitter off mode 1, DTC C1925: transmitter off mode 2, DTC C1935: transmitter off mode 3, DTC C1945: transmitter off mode 4
Keyless operation system (kos)42B-147
Wireless control module (wcm)42C-61
DTC C2000: abnormality in wheel fluid pressure sensor circuit35C-135
DTC C2001: abnormality in wheel fluid pressure sensor output signal35C-136
DTC C2002: abnormality in valve calibration35C-196
DTC C2101: abnormality in battery voltage (high voltage)35C-150
DTC C2104: faulty valve power supply circuit35C-118
DTC C2111: brake fluid pressure sensor power supply circuit (low input), DTC C2112: brake fluid pressure sensor power supply circuit (high input)35C-176
DTC C2114: abnormality in g and yaw rate sensor operation voltage, DTC C2115: abnormality in g and yaw rate sensor operation voltage35C-178
DTC C2116: abnormality in power supply voltage in pump motor35C-126
DTC C2200: abnormality in ECU35C-149
DTC C2203: vin not recorded35C-162
DTC C2204: internal abnormality in g and yaw rate sensor35C-174
DTC C2205: internal malfunction of steering wheel sensor35C-188
DTC U0001: off35C-198
DTC U0019: bus off (CAN-b)
Keyless operation system (kos)42B-148
Wireless control module (wcm)42C-62
DTC U0100: engine out error, DTC U0101: sst out error, DTC U0126: steering wheel sensor out error, DTC U0141: ETACS out error, DTC U0136: awc out error35C-199
DTC U0125: g and yaw rate sensor message out error/message error35C-202
DTC U0141: ETACS-ECU CAN timeout
Keyless operation system (kos)42B-150
Wireless control module (wcm)42C-64
DTC U0151: SRS-ECU CAN timeout
Keyless operation system (kos)42B-151
Wireless control module (wcm)42C-65
DTC U0154: occupant classification-ECU CAN timeout
Keyless operation system (kos)42B-153
Wireless control module (wcm)42C-67
DTC U0155: combination meter CAN timeout
Keyless operation system (kos)42B-154
Wireless control module (wcm)42C-68
DTC U0164: A/C-ECU CAN timeout
Keyless operation system (kos)42B-156
Wireless control module (wcm)42C-70
DTC U0184: audio CAN timeout
Keyless operation system (kos)42B-157
Wireless control module (wcm)42C-71
DTC U0195: satellite radio tuner CAN timeout
Keyless operation system (kos)42B-159
Wireless control module (wcm)42C-73
DTC U0197: hands free module CAN timeout
Keyless operation system (kos)42B-160
Wireless control module (wcm)42C-74
DTC U0245: audio visual navigation unit CAN timeout
Keyless operation system (kos)42B-162
Wireless control module (wcm)42C-76
DTC U0251: awc out error (local CAN), DTC U0440: awc communication error (local CAN), DTC U0435: awc signal abnormality (local CAN)35C-208
DTC U0401: engine malfunction detected35C-205
DTC U0428: communication error in steering wheel sensor35C-206
DTC U1003: g and yaw rate sensor off35C-210
DTC U1412: implausible vehicle speed signal received
Keyless operation system (kos)42B-163
Wireless control module (wcm)42C-77
DTC U1415: coding not completed/data fail
Keyless operation system (kos)42B-165
Wireless control module (wcm)42C-79
DTC U1415: variant coding not completed35C-213
DTC U1417: implausible coding data42C-80
DTC U1417: variant coding value invalid (includes faulty installation)35C-215
Id code registration necessity judgment table42B-12
Id codes registration judgment table42C-9
Input signal procedures
Signals from transmitter switches are not received.
Keyless operation system (kos)42B-260
Wireless control module (wcm)42C-111
Input signal reference table
Keyless operation system (kos)42B-259
Wireless control module (wcm)42C-111
Introduction to ASC diagnosis35C-6
Precautions for diagnosis35C-7
Standard flow of diagnostic troubleshooting
Keyless operation system (kos)42B-10
Wireless control module (wcm)42C-6
Symptom procedures
Inspection procedure 1: scan tool cannot communicate with ECU42B-172
Inspection procedure 1: scan tool cannot communicate with wcm42C-85
Inspection procedure 1: the scan tool cannot communicate with the ABS/ASC system35C-220
Inspection procedure 10: driver’s door unlock sensor does not work42B-213
Inspection procedure 10: skid control/TCL does not operate35C-241
Inspection procedure 11: ECU power supply circuit system35C-243
Inspection procedure 11: front passenger’s door lock switch does not work42B-217
Inspection procedure 12: ABS/skid control/TCL operates too frequently35C-251
Inspection procedure 12: front passenger’s door unlock sensor does not work42B-223
Inspection procedure 13: trunk lid opener switch does not work42B-229
Inspection procedure 14: keyless entry system does not work42B-234
Inspection procedure 15: kos timer lock function does not work42B-243
Inspection procedure 16: keyless entry hazard light answerback function, the dome light answerback function or the horn answerback function does not work normally42B-245
Inspection procedure 17: the trunk is not opened when the keyless operation key TRUNK button is operated42B-248
Inspection procedure 18: outer tone alarm does not sound42B-255
Inspection procedure 2: the ignition key cannot be registered using scan tool42C-86
Inspection procedure 2: the keyless operation key cannot be registered using scan tool42B-174
Inspection procedure 2: with the parking brake released, the brake warning light remains illuminated (ABS warning light is turned off)35C-221
Inspection procedure 3: abnormality in ECU power supply and ground circuits42B-185
Inspection procedure 3: engine does not start (cranking but no initial combustion)42C-88
Inspection procedure 3: the ABS warning light does not illuminate when ignition switch is turned to the on position (engine stopped)35C-225
Inspection procedure 4: abnormality in wcm power supply and ground circuits42C-90
Inspection procedure 4: keyless operation warning display does not disappear42B-188
Inspection procedure 4: the brake warning light does not illuminate when ignition switch is turned to the on position (engine stopped)35C-228
Inspection procedure 5: ig knob will not turn (keyless operation is not recognized)42B-190
Inspection procedure 5: keyless entry system does not work42C-93
Inspection procedure 5: the ABS warning light remains illuminated even after the engine is started35C-230
Inspection procedure 6: keyless entry hazard light answerback function, the dome light answerback function or the horn answerback function does not work normally42C-102
Inspection procedure 6: the ASC warning display stays on even after the engine is started35C-232
Inspection procedure 6: the engine will not start with kos (ig knob operates normally)42B-199
Inspection procedure 7: engine does not start with emergency key (cranking but no initial combustion)42B-201
Inspection procedure 7: the ASC off display remains illuminated after the engine is started35C-234
Inspection procedure 7: the timer lock function does not work after the doors have been unlocked by the keyless entry system42C-104
Inspection procedure 8: after the ASC off switch is pressed to turn off the skid control/TCL cannot be cancelled35C-237
Inspection procedure 8: No door will be locked or unlocked by operating a lock switch on any door, or by touching the unlock sensor42B-203
Inspection procedure 8: the trunk is not opened when the keyless entry transmitter TRUNK button is operated42C-105
Inspection procedure 9: abnormality in brake operation35C-239
Inspection procedure 9: driver’s door lock switch does not work42B-208
Terminal voltage reference chart42B-262
Trouble symptom chart
Active skid control system (ASC)35C-219
Keyless operation system (kos)42B-172
Wireless control module (wcm)42C-84
Warnings/alarms
Keyless operation system (kos)42B-16
Wireless control module (wcm)42C-12
Diagnosis (awc(super all wheel control))
ECU terminal voltage reference chart for acd22A-114
Data list reference table22A-107
Diagnostic function22A-9
Diagnostic trouble code chart22A-11
Diagnostic trouble code procedures
DTC C1000: stoplight switch system22A-15
DTC c100a (fl), C1015 (fr), C1020 (rl), c102b (rr): wheel speed sensor system (faulty circuit)22A-19
DTC C1011 (fl), c101c (fr), C1027 (rl), C1032 (rr): wheel speed sensor system (faulty signal)22A-20
DTC C1014 (fl), c101f (fr), c102a (rl), C1035 (rr): wheel speed sensor system (characteristics abnormality)22A-21
DTC C1078: tire turning malfunction22A-22
DTC C1219: steering wheel sensor system (faulty signal)22A-24
DTC c121a: steering wheel sensor system (neutral learning abnormality)22A-26
DTC c123c: g and yaw rate sensor (faulty signal)22A-27
DTC C1242: g and yaw rate sensor (longitudinal g output data error)22A-29
DTC C1610: awc actuator power supply electronic relay malfunction22A-31
DTC C1611: awc pressure sensor system (low voltage)22A-33
DTC C1612: awc pressure sensor system (high voltage)22A-35
DTC C1613: awc mode select switch system (clogging) (vehicles with steering audio remote control switch )22A-37
DTC C1613: awc mode select switch system (clogging) (vehicles without steering audio remote control switch )22A-40
DTC C1614: parking brake switch system (clogging on)22A-43
DTC C1615: brake control prohibition request22A-45
DTC C1616: cranking signal system (on sticking)22A-46
DTC C1617: awc CAN main data system (data not received)22A-49
DTC C1618: awc CAN local data system (data not received)22A-50
DTC c161c: acd proportioning valve system (malfunction)22A-53
DTC c161d: electric pump relay circuit system (malfunction)22A-56
DTC c161e: electric pump relay circuit system (stuck)22A-59
DTC C1622: acd controlled system (malfunction)22A-61
DTC C1623: brake controlled system (malfunction)22A-62
DTC C1624: ECU system (internal malfunction)22A-63
DTC C1625: awc pressure sensor system (abnormal power supply voltage)22A-64
DTC C2100: battery voltage malfunction (low voltage)22A-66
DTC C2101: battery voltage malfunction (high voltage)22A-70
DTC C2114: g and yaw rate sensor power supply (low voltage)22A-72
DTC C2115: g and yaw rate sensor power supply (high voltage)22A-75
DTC C2203: vin not recorded22A-77
DTC C2204: g and yaw rate sensor system (internal malfunction)22A-78
DTC C2205: steering wheel sensor system (internal malfunction)22A-79
DTC U0001: bus off22A-80
DTC U0100: engine out error22A-81
DTC U0101: sst out error22A-82
DTC U0121: ASC out error22A-83
DTC U0126: steering wheel sensor out error22A-84
DTC U0141: ETACS out error22A-85
DTC U0401: engine data error22A-86
DTC U0428: steering wheel sensor data error22A-87
DTC U0431: ETACS data error22A-88
DTC U1003: off (local CAN)22A-90
DTC U1415: coding incomplete/fail22A-91
DTC U1417: coding data malfunction22A-93
DTC U1425: sst data error22A-94
DTC U1426: ASC data error22A-95
DTC U1427: wheel speed sensor data error22A-96
DTC U1428: g and yaw rate sensor data error22A-97
Introduction
Manual transaxle22A-8
Twin sportronic shift transmission (sst)22C-328
Special function reference table22A-113
Symptom chart22A-14
Symptom procedures
Inspection procedure 1: communication between the scan tool and ECU cannot be established22A-99
Inspection procedure 2: mode does not change even when the awc switch is pressed (vehicles with steering
wheel audio remote control switch)22A-99
Inspection procedure 2: mode does not change even when the awc switch is pressed (vehicles without steering wheel audio remote control switch)22A-102
Inspection procedure 3: ECU power supply circuit malfunction22A-104
Troubleshooting strategy22A-8
Diagnosis (shift lever)
Data list reference table22C-322
Diagnosis function22C-300
Diagnostic trouble code chart22C-302
Diagnostic trouble code procedures
DTC P0563: power supply system22C-303
DTC p198d: EEPROM system22C-304
DTC p198e, p198f: lever position sensor system22C-304
DTC U0001: off22C-305
DTC U0100: engine out error22C-306
DTC U0101: sst out error22C-306
DTC U0121: ASC out error22C-307
DTC U0141: ETACS out error22C-308
Introduction22C-300
Shift lever ECU terminalvoltage reference chart22C-325
Special function (actuator test reference table)22C-325
Symptom chart22C-302
Symptom procedures
Inspection procedure 1: the scan tool cannot communicate with the shift ECU22C-309
Inspection procedure 2: shift indicator light does not illuminate22C-309
Inspection procedure 3: up light does not illuminate22C-312
Inspection procedure 4: the driving mode cannot be changed22C-316
Inspection procedure 5: speed change with the paddle shift is impossible22C-317
Inspection procedure 6: shift ECU power supply circuit abnormality22C-319
Troubleshooting strategy22C-300
Diagnosis (tc-sst)
Data list reference table22C-298
Diagnosis function22C-6
Diagnostic trouble code chart22C-10
Diagnostic trouble code procedures
DTC P0630: vin not recorded22C-15
DTC P0701: EEPROM system (malfunction)22C-16
DTC P0702: internal control module, monitoring processor system (malfunction)22C-16
DTC P0711: ECU temperature sensor system (gradient error)22C-18
DTC P0712: ECU temperature sensor system (output low range out)22C-20
DTC P0713: ECU temperature sensor system (output high range out)22C-22
DTC P0715: input shaft 1 (odd number gear axle) speed sensor system (output high range out)22C-24
DTC P0716: input shaft 1 (odd number gear axle) speed sensor system (poor performance)22C-26
DTC P0717: input shaft 1 (odd number gear axle) speed sensor system (output current low range out).22C-30
DTC P0725: engine speed signal abnormality22C-32
DTC P0746: line pressure solenoid system (drive current range out)22C-33
DTC P0753: shift select solenoid 1 system (open circuit)22C-35
DTC P0758: shift select solenoid 2 system (open circuit)22C-36
DTC P0776: clutch cooling flow solenoid system (drive current range out)22C-38
DTC P0777: clutch cooling flow solenoid system (stuck)22C-39
DTC P0841: clutch 1 pressure sensor system (poor performance)22C-41
DTC P0842: clutch 1 pressure sensor system (output low range out)22C-43
DTC P0843: clutch 1 pressure sensor system (output high range out)22C-45
DTC P0846: clutch 2 pressure sensor system (poor performance)22C-47
DTC P0847: clutch 2 pressure sensor system (output low range out)22C-49
DTC P0848: clutch 2 pressure sensor system (output high range out)22C-51
DTC P0960: line pressure solenoid system (open circuit)22C-53
DTC P0961: line pressure solenoid system (overcurrent)22C-54
DTC P0962: line pressure solenoid system (short to ground)22C-56
DTC P0963: line pressure solenoid system (short to power supply)22C-58
DTC P0964: clutch cooling flow solenoid system (open circuit)22C-59
DTC P0965: clutch cooling flow solenoid system (overcurrent)22C-61
DTC P0966: clutch cooling flow solenoid system (short to ground)22C-63
DTC P0967: clutch cooling flow solenoid system (short to power supply)22C-65
DTC P0968: shift/cooling changeover solenoid system (open circuit)22C-66
DTC P0970: shift/cooling changeover solenoid system (short to ground)22C-68
DTC P0971: shift/cooling changeover solenoid system (short to power supply)22C-69
DTC P0973: shift select solenoid 1 system (short to ground)22C-71
DTC P0974: shift select solenoid 1 system (short to power supply)22C-72
DTC P0976: shift select solenoid 2 system (short to ground)22C-74
DTC P0977: shift select solenoid 2 system (short to power supply)22C-75
DTC P1637: EEPROM system (DTC storing malfunction)22C-77
DTC P1676: coding incomplete22C-78
DTC P1802: shift lever system (lin communication malfunction)22C-80
DTC P1803: shift lever system (CAN, lin out error)22C-82
DTC P1804: shift fork position sensor 1 and 2 system (power supply voltage low range out)22C-84
DTC P1805: shift fork position sensor 1 and 2 system (power supply voltage high range out)22C-86
DTC P1806: shift fork position sensor 3 and 4 system (power supply voltage low range out)22C-88
DTC P1807: shift fork position sensor 3 and 4 system (power supply voltage high range out)22C-90
DTC P1808: ECU temperature, fluid temperature sensor system (correlation error)22C-92
DTC p180c: clutch pressure cut spool sticking22C-93
DTC p181b: clutch 1 (pressure low range out)22C-94
DTC p181c: clutch 1 (pressure high range out)22C-95
DTC p181e: clutch 2 (pressure low range out)22C-99
DTC p181f: clutch 2 (pressure high range out)22C-101
DTC P1820: shift fork position sensor 1 system (voltage low range out)22C-105
DTC P1821: shift fork position sensor 1 system (voltage high range out)22C-107
DTC P1822: shift fork position sensor 1 system (output range out)22C-109
DTC P1823: shift fork position sensor 1 system (neutral)22C-111
DTC P1824: shift fork position sensor 1 system (poor performance)22C-113
DTC P1825: shift fork position sensor 2 system (voltage low range out)22C-116
DTC P1826: shift fork position sensor 2 system (voltage high range out)22C-118
DTC P1827: shift fork position sensor 2 system (output range out)22C-120
DTC P1828: shift fork position sensor 2 system (neutral)22C-122
DTC P1829: shift fork position sensor 2 system (poor performance)22C-124
DTC p182a: shift fork position sensor 3 system (voltage low range out)22C-127
DTC p182b: shift fork position sensor 3 system (voltage high range out)22C-129
DTC p182c: shift fork position sensor 3 system (output range out)22C-131
DTC p182d: shift fork position sensor 3 system (neutral)22C-133
DTC p182e: shift fork position sensor 3 system (poor performance)22C-135
DTC P1831: shift fork position sensor 4 system (voltage low range out)22C-137
DTC P1832: shift fork position sensor 4 system (voltage high range out)22C-139
DTC P1833: shift fork position sensor 4 system (output range out)22C-141
DTC P1834: shift fork position sensor 4 system (neutral)22C-143
DTC P1835: shift fork position sensor 4 system (poor performance)22C-145
DTC P1836: shift fork 1 malfunction22C-148
DTC p183d: shift fork 2 malfunction22C-156
DTC P1844: shift fork 3 malfunction22C-164
DTC p184b: shift fork 4 malfunction22C-171
DTC P1852: shift fork 1 or 2 opposite direction movement22C-179
DTC P1855: shift fork 3 or 4 opposite direction movement22C-182
DTC P1857: odd number gear axle interlock22C-185
DTC P1858: even number gear axle interlock22C-187
DTC P1859: disengagement too late with clutch 122C-189
DTC p185a: engagement too late with clutch 122C-190
DTC p185b: disengagement too late with clutch 222C-191
DTC p185c: engagement too late with clutch 222C-193
DTC p185d: clutch open not possible22C-193
DTC P1862: high side 1 system (overcurrent)22C-195
DTC P1863: high side 1 system (open circuit)22C-197
DTC P1864: high side 1 system (short to power supply)22C-199
DTC P1866: high side 2 system (overcurrent)22C-201
DTC P1867: high side 2 system (open circuit)22C-203
DTC P1868: high side 2 system (short to power supply)22C-205
DTC p186a: high side 3 system (overcurrent)22C-207
DTC p186b: high side 3 system (open circuit)22C-209
DTC p186c: high side 3 system (short to power supply)22C-211
DTC p186d: high side 1 system (voltage low range out)22C-213
DTC p186e: high side 2 system (voltage low range out)22C-215
DTC p186f: high side 3 system (voltage low range out)22C-217
DTC P1870: engine torque signal abnormality22C-219
DTC P1871: aps system (signal abnormality)22C-221
DTC P1872: between shift lever and sst system (a function abnormality)22C-223
DTC P1873: clutch 1 system (pressure abnormality)22C-225
DTC P1874: clutch 2 system (pressure abnormality)22C-225
DTC P1875: damper speed sensor system (poor performance)22C-226
DTC P1876: 1st gear block22C-229
DTC P1877: gear block 2nd gear22C-230
DTC P1878: gear block 3rd gear22C-232
DTC P1879: gear block 4th gear22C-233
DTC p187a: gear block 5th gear22C-235
DTC p187b: gear block 6th gear22C-236
DTC p187c: gear block reverse gear22C-238
DTC P1880: eol mode active22C-239
DTC P1881: twin clutch sst control mode switch system (malfunction)22C-240
DTC P2718: clutch/shift pressure solenoid 1 system (open circuit)22C-241
DTC P2719: clutch/shift pressure solenoid 1 system (overcurrent)22C-243
DTC P2720: clutch/shift pressure solenoid 1 system (short to ground)22C-245
DTC P2721: clutch/shift pressure solenoid 1 system (short to power supply)22C-247
DTC P2727: clutch/shift pressure solenoid 2 system (open circuit)22C-249
DTC P2728: clutch/shift pressure solenoid 2 system (overcurrent)22C-251
DTC P2729: clutch/shift pressure solenoid 2 system (short to ground)22C-253
DTC P2730: clutch/shift pressure solenoid 2 system (short to power supply)22C-255
DTC P2733: clutch/shift changeover solenoid 1, spool stuck22C-257
DTC P2736: clutch/shift changeover solenoid 1 system (open circuit)22C-259
DTC P2738: clutch/shift changeover solenoid 1 system (short to ground)22C-261
DTC P2739: clutch/shift changeover solenoid 1 system (short to power supply)22C-262
DTC P2741: fluid temperature sensor system (gradient error)22C-264
DTC P2742: fluid temperature sensor system (output low range out)22C-266
DTC P2743: fluid temperature sensor system (output high range out)22C-268
DTC P2766: input shaft 2 (even number gear axle) speed sensor system (poor performance)22C-270
DTC P2809: clutch/shift changeover solenoid 2, spool stuck22C-274
DTC P2812: clutch/shift changeover solenoid 2 system (open circuit)22C-276
DTC P2814: clutch/shift changeover solenoid 2 system (short to ground)22C-278
DTC P2815: clutch/shift changeover solenoid 2 system (short to power supply)22C-280
DTC U0001: off22C-282
DTC U0100: engine out error22C-284
DTC U0103: shift lever out error22C-286
DTC U0121: ASC out error22C-287
DTC U0136: awc out error22C-287
DTC U0141: ETACS out error22C-288
Introduction22C-6
Symptom chart22C-15
Symptom procedures
Inspection procedure 1: the scan tool cannot communicate with ECU22C-289
Inspection procedure 2: the driving mode cannot be changed22C-290
Inspection procedure 3: speed change with the paddle shift is impossible22C-292
Inspection procedure 4: ECU power supply circuit malfunction22C-295
ECU terminal voltage reference chart22C-299
Troubleshooting strategy22C-6
Differential carrier assembly
Disassembly and reassembly27-54
Removal and installation27-52
Dome light
Diagnosis
Diagnostic function54A-241
Standard flow of diagnostic troubleshooting54A-241
Dome light removal and installation54A-259
General information54A-239
Luggage compartment light removal and installation54A-260
On-vehicle service
Customization function54A-258
Special tools54A-240
Symptom procedures
Inspection procedure 1: the front dome light does not illuminate normally54A-243
Inspection procedure 2: the rear dome light does not illuminate normally54A-248
Inspection procedure 3: the luggage compartment light does not illuminate normally54A-252
Inspection procedure 4: the interior light cut function does not operate correctly54A-255
Trouble symptom chart54A-243
Dome light, luggage compartment light and ignition key hole illumination light90-122
Door80A-18
Door
Central door locking system diagnosis
Trouble symptom chart42A-30
Troubleshooting strategy42A-30
Check at ECU terminal42A-103
Diagnostic trouble code procedures (power window)
Code no. L0730 p/w (dr) sw pulse 1 disconnection42A-59
Code no. L0732 p/w (dr) sw pulse 2 disconnection42A-61
Code no. L0734 p/w (dr) above window position42A-63
Code no. L0736 p/w (dr) sensor fail (ground)42A-64
Code no. L0740 p/w (dr) 3 times jam protection42A-66
Code no. L0746 p/w (dr) parameter read failcode no. L0750 p/w (dr) position read fail42A-67
Door assembly
Inspection42A-123
Removal and installation42A-121
Door diagnosis
Glass and door diagnostic troubleshooting strategy42A-104
Introduction to glass and door diagnosis42A-104
Symptom chart42A-104
Door glass and regulator
Inspection42A-127
Removal and installation42A-124
Door handle and latch
Inspection42A-133
Removal and installation42A-129
General information42A-28
How to locate wind noise42A-107
On-vehicle service
Central door locking system check42A-118
Check of key lock prevention function42A-118
Configuration function42A-120
Door fit adjustment42A-111
Door inside handle check42A-119
Door outside handle play check42A-118
Door window glass adjustment42A-114
Glass sliding mechanism check and adjustment42A-115
Learning procedures of the power window fully
closed position (drivers side)42A-117
Power window check42A-115
Power window operating current check42A-116
Power window safety mechanism check (drivers side)42A-116
Power window timer function check42A-116
Shift P interlink door unlock function check (vehicles with sst)42A-118
Power window diagnosis
Diagnostic trouble code chart42A-58
Trouble symptom chart42A-58
Troubleshooting strategy42A-57
Protector film
Removal and installation42A-141
Special tools42A-109
Specification(s)
Component identifications42A-28
Sealant42A-28
Service specifications42A-28
Symptom procedures
Inspection procedure 1: water leak through door window glass42A-104
Inspection procedure 2: door window glass malfunction42A-105
Inspection procedure 3: water leak through door edge42A-105
Inspection procedure 4: water leak from door center.42A-105
Inspection procedure 5: door hard to open42A-106
Inspection procedure 6: door does not open or close completely42A-106
Inspection procedure 7: uneven gap between body42A-106
Inspection procedure 8: wind noise around door42A-107
Symptom procedures (central door locking system)
Inspection procedure 1: central door locking system does not work at all42A-31
Inspection procedure 2: central door locking system does not operate even when door lock switch of power window main switch operated (door lock switch of front power window sub switch operate normally)42A-36
Inspection procedure 3: central door locking system does not operate even when door lock switch of front power window sub switch operated (door lock switch of power window main switch operate normally)42A-40
Inspection procedure 4: a door cannot be locked or unlocked by the central door locking system42A-44
Inspection procedure 5: selector P linked door unlock function does not operate normally. (vehicles with sst)42A-55
Symptom procedures (power window) Inspection procedure 1: power windows do not work at all42A-68
Inspection procedure 2: driver’s power window does not work by means of the power window main switch.42A-75
Inspection procedure 3: relevant power window(s) does not work by means of the front and rear passenger’s power window sub switches42A-78
Inspection procedure 4: front and/or rear passenger’s power window(s) do not work by means of the power window main switch42A-94
Inspection procedure 5: the power window timer function does not work normally42A-98
Inspection procedure 6: power window trap function does not work normally. (driver?s side seat)42A-100
Inspection procedure 7: the window glass lowers automatically while it is rising42A-102
Window glass runchannel and door opening weatherstrip Removal and installation42A-136
Door ajar warning tone alarm90-340
Door mirror
Inspection51-81
Removal and installation51-79
Door sash tape
Removal and installation51-10
Special tool51-9
Door trim
Removal and installation52A-15
Driver’s air bag module and clock spring
Inspection52B-392
Removal and installation52B-386
Driveshaft assembly
Disassembly and assembly
Front axle26-20
Rear axle27-48
Ebj boot replacement
Front axle26-23
Rear axle27-51
Removal and installation
Front axle26-15
Rear axle27-43
Ducts
Removal and installation55-138

E

Emission control MFI t/c
Catalytic converter
Removal and installation17-81
Diagnosis17-69
Evaporative emission canister and fuel tank pressure relief valve
Inspection17-80
Removal and installation17-79
Evaporative emission control system
Barometric pressure sensor check17-78
Component location17-76
Crankshaft position sensor check17-78
Engine coolant temperature sensor check17-78
Evaporative emission purge solenoid check17-77
General information (evaporative emission system)17-74
Mass airflow sensor check17-78
No. 1 intake air temperature sensor check17-78
Purge control system check (purge flow check)17-76
Throttle position sensor check17-78
General information17-69
Positive crankcase ventilation system
Component location17-73
General information (positive crankcase ventilation system)17-72
Positive crankcase ventilation (pcv) system check
Engine and emission control17-73
Engine and emission control17-73
Service specifications17-69
Special tools17-69
Vacuum hoses17-70
Vacuum hoses
Vacuum circuit diagram17-71
Vacuum hose check17-72
Vacuum hose installation17-72
Vacuum hose routing17-70
Engine and transaxle
Configuration diagrams80A-6
Splice locations80B-4
Engine assembly
Removal and installation11A-80
Engine compartment
Configuration diagrams80A-4
Splice locations80B-4
Engine control
Accelerator pedal
Removal and installation17-8
Engine control system diagnosis
Introduction17-3
Troubleshooting strategy17-3
General information17-3
Special tool17-7
Symptom chart17-3
Symptom procedures
Inspection procedure 1: throttle valve will not fully open or close17-4
Inspection procedure 2: accelerator pedal operation not smooth (over acceleration)17-5
Engine control module (ECM)
Removal and installation13A-920
Engine control resistor
Removal and installation13A-919
Engine cooling diagnosis
Introduction14-3
Symptom chart14-3
Symptom procedures
Inspection procedure 1: coolant leak14-4
Inspection procedure 2: engine overheating14-5
Inspection procedure 3: radiator fan and condenser fan do not operate14-6
Troubleshooting strategy14-3
Engine diagnosis11A-2
Engine mounting
Removal and installation32-4
Engine oil cooler
Removal and installation12-9
Engine oil pressure switch
Removal and installation12-7
ETACS
Check with terminal voltage54A-677
Diagnosis trouble code procedures
DTC B1761: vin not recorded54A-619
DTC b210a: +b power supply (low input), DTC b210b: +b power supply (high input)54A-621
DTC B2206: chassis number does not match54A-625
DTC B2215: ECU internal error54A-627
DTC b222c: coding incomplete54A-625
DTC B2353: ignition power supply (low input), DTC B2354: ignition power supply (high input)54A-627
DTC U0001: bus off (c)DTC U0019: bus off (b)54A-584
DTC U0100: engine control module CAN timeout54A-585
DTC U0101: ECU CAN timeout54A-587
DTC U0103: shift lever CAN timeout54A-589
DTC U0121: ECU CAN timeout54A-591
DTC U0126: steering wheel sensor CAN timeout54A-593
DTC U0136: ECU CAN timeout54A-595
DTC U0151: ECU CAN timeout54A-597
DTC U0154: occupant ECU CAN timeout54A-599
DTC U0155: combination meter CAN timeout54A-601
DTC U0164: A/ECU CAN timeout54A-603
DTC U0168: wcm or ECU CAN timeout54A-605
DTC U0184: audio CAN timeout54A-607
DTC U0195: satellite radio tuner CAN timeout54A-609
DTC U0197: hands free module CAN timeout54A-611
DTC U0245: CAN box unit CAN timeout54A-613
DTC U0331: ECU internal error54A-618
DTC U1108: excess b ECU detection54A-615
DTC U1120: bus line (c) low input, DTC U1121: bus line (c) high input54A-617
Diagnostic trouble code chart54A-582
ETACS-ECU
Removal and installation54A-676
Input signal procedures
Inspection procedure 1: ECU does not receive any signal from the ignition switch (acc)54A-640
Inspection procedure 10: ECU does not receive any signal from the hazard warning light switch54A-667
Inspection procedure 11: ECU does not receive any signal from the column switch signal54A-669
Inspection procedure 12: ECU does not receive any signal from the hood switch54A-670
Inspection procedure 2: ECU does not receive any signal from the ignition switch (ig1)54A-642
Inspection procedure 3: ECU does not receive any signal from the key reminder switch54A-644
Inspection procedure 4: ECU does not receive any signal from the front door lock actuator54A-647
Inspection procedure 5: ECU does not receive any signal from the front door switch (lh)54A-654
Inspection procedure 6: ECU does not receive any signal from the front door switch (rh)54A-656
Inspection procedure 7: ECU does not receive any signal from the rear door switch (lh)54A-658
Inspection procedure 8: ECU does not receive any signal from the rear door switch (rh)54A-661
Inspection procedure 9: ECU does not receive any signal from the trunk lid latch54A-663
On-vehicle service
Customization function54A-673
Service data54A-630
Special tool54A-578
Symptom procedures
Malfunction of ECU power supply circuit54A-636
Trouble symptom chart54A-635
Trouble symptom chart for input signal54A-639
Troubleshooting
Diagnostic function54A-579
Standard flow of diagnostic troubleshooting54A-579
ECU90-10
Exhaust manifold
Removal and installation11B-20
Exhaust manifold and turbocharger
Inspection15-23
Removal and installation15-16
Exhaust pipe and main muffler
Removal and installation15-24
Explanation about the sCAN tool (M.U.T.III) CAN bus diagnostics54C-9
Exterior transmitter antenna assembly, interior transmitter antenna assembly, receiver antenna module
Removal and installation42B-279

F

Fastener tightening specification22D-2
Fastener tightening specifications
Engine overhaul11B-4
Manual transaxle overhaul22B-4
Front suspension33-2
Rear suspension34-4
Heater, air conditioning and ventilation55-5
Fender
Removal and installation42A-11
Floor and roof
Configuration diagrams80A-16
Splice locations80B-6
Floor console assembly
Removal and installation52A-9
Fog light90-114
Fog light
Diagnosis
Diagnostic function54A-219
Standard flow of diagnostic troubleshooting54A-219
Inspection
Front fog light relay check54A-237
On-vehicle service
Front fog light aiming54A-234
Front fog light bulb replacement54A-235
Removal and installation54A-236
Service specifications54A-217
Special tools54A-218
Symptom procedures
Inspection procedure 1: all the front fog lights do not illuminate normally54A-222
Inspection procedure 2: one of the fog lights does not illuminate54A-228
Inspection procedure 3: the front fog light indicator does not illuminate normally54A-232
Trouble symptom chart54A-221
Front axle diagnosis
Symptom chart26-4
Symptom procedures
Inspection procedure 1: noise during wheel rotation.26-5
Inspection procedure 2: noise due to excessive play of wheel in turning direction26-6
Troubleshooting strategy26-4
Front axle hub assembly
Inspection26-13
Removal and installation26-9
Front bumper assembly and radiator grille
Disassembly and assembly51-4
Removal and installation51-3
Front disc brake assembly
Disassembly and assembly35A-35
Inspection
Basic brake system35A-34
Basic brake system35A-36
Removal and installation35A-33
Front impact sensors
Inspection52B-382
Removal and installation52B-380
Front roll stopper and centermember
Removal and installation32-8
Front suspension diagnosis
Front suspension diagnosis troubleshooting strategy33-4
Introduction to front suspension diagnosis33-4
Symptom chart33-4
Symptom procedures
Inspection procedure 1: steering wheel is heavy, vibrates or pulls to one side33-4
Inspection procedure 2: excessive body rolling33-5
Inspection procedure 3: poor ride33-5
Inspection procedure 4: unequal ride height33-5
Inspection procedure 5: noise33-6
Fuel filler lid
Removal and installation42A-14
Fuel supply diagnosis
Introduction13B-2
Symptom procedures13B-3
Troubleshooting strategy13B-2
Fuel tank
Disassembly and assembly13B-15
Disassembly and reassembly13B-17
Fuel tank inspection13B-18
Removal and installation13B-10
Fusible link, fuse and iod or storage connector70-13

G

G and yaw rate sensor
Removal and installation35C-278
Garnishes and moldings
Removal and installation51-8
Special tool51-8
General data and specifications00-52
General description22D-2
General information
Engine mechanical11A-2
Engine lubrication12-2
Multiport fuel injection (MFI)13A-2
Fuel supply13B-2
Engine cooling14-2
Intake and exhaust15-2
Clutch21A-2
Manual transaxle22A-2
Manual transaxle overhaul22B-2
Twin sportronic shift transmission (sst)22C-3
Propeller shaft25-2
Front axle26-2
Rear axle27-2
Power plant mount32-2
Front suspension33-2
Rear suspension34-2
Basic brake system35A-2
Active skid control system (ASC)35C-2
Parking brakes36-2
Power steering37-2
Keyless operation system (kos)42B-2
Wireless control module (wcm)42C-2
Interior52A-2
Supplemental restraint system (SRS)52B-3
Local interconnect network (lin)54B-2
Controller area network (CAN)54C-2
Heater, air conditioning and ventilation55-3
General specification22D-2
General specification(s)13A-5
General specifications
Engine overhaul11B-2
Clutch overhaul21B-2
Manual transaxle overhaul22B-3
Propeller shaft25-2
Front axle26-3
Rear axle27-3
Wheel and tire31-2
Front suspension33-3
Rear suspension34-4
Basic brake system35A-2
Power steering37-2
Heater, air conditioning and ventilation55-5
Generator and ignition system
Removal and installation11B-10
Glove box
Removal and installation52A-6
Grounding70-17
Grounding cable70-16

H

Hands free system90-318
Hands-free cellular phone system
Diagnosis54A-459
Diagnosis
Diagnosis function54A-459
Standard flow of diagnostic troubleshooting54A-459
Diagnostic trouble code chart54A-462
Diagnostic trouble code procedures
Code No.U0184 audio CAN timeout54A-484
DTC B2468: microphone input short to batt54A-463
DTC B2470: microphone input short to ground54A-463
DTC B2471: on hook button stuck.54A-466
DTC B2472: off hook button stuck.54A-466
DTC B2473: vr button stuck54A-466
DTC B2475: vin not programmed54A-472
DTC U0019: bus off (b)54A-473
DTC U0141: ETACS CAN timeout54A-475
DTC U0151: abg CAN timeout54A-476
DTC U0154: ocm CAN timeout54A-478
DTC U0155: meter CAN timeout54A-479
DTC U0164: A/C CAN timeout54A-481
DTC U0168: wcm CAN timeout54A-482
DTC U0195: satellite radio CAN timeout54A-485
DTC U0245 and CAN timeout54A-487
General information54A-455
On-vehicle service
Erase the passcode54A-516
Pairing a cellular phone or deleting a phone54A-513
Removal and installation54A-517
Service data54A-516
Special tools54A-458
Steering wheel voice control switch continuity check54A-518
Symptom procedures
Inspection procedure 1: hands free cellular phone system does not work normally54A-489
Inspection procedure 2: during the conversation with the hands free cellular phone system, the speaker?s voice cannot be heard by the other party54A-497
Inspection procedure 3: during the conversation with the hands free cellular phone system, the voice of other party cannot be heard54A-500
Inspection procedure 4: even when the steering wheel voice control switch is operated, the conversation is not possible54A-501
Inspection procedure 5: the cellular phone is not recognized or the connection cannot be established.54A-506
Inspection procedure 6: steering wheel voice control switch illumination does not come on54A-507
Inspection procedure 7: check the hands free module power supply circuit54A-511
Trouble symptom chart54A-488
Harness connector inspection00E-2
Hazard warning light switch
Diagnosis
Diagnostic function54A-263
Standard flow of diagnostic troubleshooting54A-263
Diagnostic trouble code chart54A-265
Diagnostic trouble code procedures
DTC b16a6: signal fuse blown54A-265
Inspection
Hazard warning light switch check54A-268
Removal and installation54A-268
Special tools54A-262
Symptom procedures
Inspection procedure 1: the hazard warning lights do not illuminate54A-266
Trouble symptom chart54A-266
Headlight
Data list reference table54A-174
Diagnosis
Diagnostic function54A-105
Standard flow of diagnostic troubleshooting54A-105
Diagnostic trouble code chart54A-107
Diagnostic trouble code procedures
DTC b16a2: blown signal light (lh) bulb54A-107
DTC b16a3: signal light (lh) short circuit54A-113
DTC b16a4: blown signal light (rh) bulb54A-116
DTC b16a5: signal light (rh) short circuit54A-121
DTC L0432: rls rs adaptation error54A-124
DTC L0434: rls rain sensor errorDTC L0436: rls light sensor error54A-125
General information54A-102
Headlight leveling switch removal and installation54A-186
Headlight removal and installation54A-184
Inspection
Headlight leveling switch check (vehicles with headlight manual leveling system)54A-190
Headlight relay check54A-189
Lighting control sensor (light sensor) check54A-191
Lighting control sensor removal and installation54A-187
On-vehicle service
Customization function54A-183
Headlight aiming54A-175
Headlight auto light function check54A-182
Headlight shutdown function check54A-182
Luminous intensity measurement54A-178
Replace the bulb54A-179
Service specifications54A-103
Special tools54A-104
Symptom procedures
Inspection procedure 1: all the headlights (beam) do not illuminate54A-128
Inspection procedure 10: the auto light function does not work normally54A-166
Inspection procedure 11: all the signal lights do not illuminate54A-168
Inspection procedure 12: the comfort flashing function does not work normally54A-170
Inspection procedure 13: the signal indicator light do not illuminate54A-172
Inspection procedure 2: all the headlights (beam) do not illuminate54A-133
Inspection procedure 3: the headlights illuminate at beam (beam does not illuminate) regardless of the lighting switch positions54A-137
Inspection procedure 4: headlights do not illuminate when the passing switch is operated54A-138
Inspection procedure 5: one of the headlights does not illuminate54A-140
Inspection procedure 6: beam indicator light does not illuminate normally54A-144
Inspection procedure 7: the headlight automatic shutdown function does not work normally54A-146
Inspection procedure 8: daytime running light function does not work normally. (discharge type headlight).54A-153
Inspection procedure 8: daytime running light function does not work normally. (halogen type headlight)54A-149
Inspection procedure 9: any of the tail lights, the position lights or the license plate lights does not illuminate54A-160
Trouble symptom chart54A-127
Headlight (discharge type)90-96
Headlight (halogen type)90-90
Headlight leveling system90-102
Headlining
Removal and installation52A-17
Heated seat90-314
Heater control unit
Removal and installation55-119
Heater unit and blower assembly
Disassembly and reassembly55-123
Inspection55-124
Removal and installation55-120
High-mounted stoplight
Removal and installation54A-261
Hood
Hood
Disassembly and assembly42A-9
Hood removal and installation42A-7
Inspection42A-8
Hood diagnosis
Introduction42A-4
Troubleshooting strategy42A-4
On-vehicle service
Adjustment of clearance around hood42A-5
Adjustment of hood height42A-6
Alignment of hood latch and striker42A-5
Symptom procedures
Inspection procedure 1: difficult locking and unlocking42A-4
Inspection procedure 2: uneven body clearance42A-5
Inspection procedure 3: uneven height42A-5
Trouble symptom chart42A-4
Horn90-139
Horn
Inspection
Horn relay check54A-269
Removal and installation54A-268
How to diagnose
Battery handling00E-12
Cables and wires check00E-12
Checking fuses00E-9
Checking relays00E-11
Checking switches00E-10
General electrical system check00E-12
How to diagnose00E-6
Information for diagnosis00E-6
Inspection00E-7
Inspection instruments00E-7
Troubleshooting steps00E-6
How to read circuit diagrams90-4
How to read configuration diagrams80A-3
How to read splice locations80B-2
How to use this manual00-3
How to use troubleshooting/inspection service points
Connector inspection service points00-14
Connector measurement service points00-12
How to cope with intermittent malfunctions00-15
How to treat past trouble00-16
How to use the inspection procedures00-10
Inspection service points for a blown fuse00-17
Troubleshooting contents00-7
Hydraulic unit
Hydraulic unit disposal
Manual transaxle22A-134
Rear axle27-60
Removal and installation
Manual transaxle22A-134
Twin sportronic shift transmission (sst)22C-349
Rear axle27-58
Active skid control system (ASC)35C-272

I

Ignition key reminder tone alarm (vehicles with kos)90-332
Ignition key reminder tone alarm (vehicles without kos)90-330
Ignition switch
Inspection
Ignition switch continuity check54A-22
Key reminder switch inspection54A-22
On-vehicle service
Check of ignition key reminder warning function (steering lock reminder buzzer by kos)54A-19
Removal and installation54A-19
Special tools54A-12
Symptom procedures
Ignition key cylinder illumination light does not illuminate/extinguish normally. (vehicles with wcm).54A-15
Trouble symptom chart54A-15
Troubleshooting
Diagnosis function54A-13
Standard flow of diagnostic trouble shooting54A-13
Ignition system90-40
Ignition system
Camshaft position sensor
Removal and installation16-40
Crankshaft position sensor
Removal and installation16-41
General information16-34
General specification(s)16-35
Ignition coil
Removal and installation16-39
Knock sensor
Removal and installation16-42
On-vehicle service16-36
On-vehicle service
Camshaft position sensor check16-38
Crankshaft position sensor check16-38
Ignition coil check16-36
Knock control system check16-36
Spark plug check and cleaning16-37
Spark plug test16-37
Service specification(s)16-35
Immobilizer system (M/T)90-304
Immobilizer system (sst)90-308
Index80B-3
Individual component service52B-377
Injector13A-914
Injector
Removal and installation13A-914
Input shaft
Disassembly and assembly22B-22
Inspection22B-27
Inside rear view mirror52A-19
Inspection terminal70-7
Instrument center panel
Removal and instllation52A-7
Instrument lower panel
Removal and installation52A-8
Instrument panel assembly
Removal and installation52A-2
Intake and exhaust diagnosis
Introduction15-2
Symptom chart15-2
Symptom procedures
Inspection procedure 1: exhaust leakage15-3
Inspection procedure 2: abnormal noise15-3
Troubleshooting strategy15-2
Intake manifold
Inspection15-14
Removal and installation15-12
Intake manifold and fuel system
Removal and installation11B-16
Interior temperature sensor
Inspection55-128
Removal and installation55-128

J

Joint connector90-14

K

Key interlock and shift lock mechanisms
Removal and installation22C-337
Keyless operating system (kos)90-174
Keyless operation key
Disassembly and assembly42B-282
Inspection42B-284
Knee air bag module
Inspection52B-401
Removal and installation52B-398
Knuckle
Removal and installation27-40
Kos-ECU
Removal and installation42B-278

L

License plate light
Removal and installation54A-261
Loose panel
Removal and installation42A-192
Lower arm
Lower arm ball joint dust cover replacement33-16
Lower arm check33-16
Removal and installation33-15
Lubricant
Manual transaxle22A-2
Twin sportronic shift transmission (sst)22C-3
Twin clutch sst overhaul22D-3
Parking brakes36-2
Lubricant(s)21A-2
Lubricants
Engine lubrication12-3
Clutch overhaul21B-2
Manual transaxle overhaul22B-5
Propeller shaft25-3
Front axle26-4
Rear axle27-4
Rear suspension34-5
Basic brake system35A-4
Power steering37-3
Heater, air conditioning and ventilation55-5
Lubrication and maintenance00-55
Luggage compartment
Configuration diagrams80A-20
Splice locations80B-6

M

Main sealant and adhesive table00-80
Maintenance service
. fuel system (tank, pipe line and connection, and fuel tank filler tube cap) (check for leaks)00-63
. engine oil filter (replace)00-68
. manual transaxle oil (check oil level and condition/rchange)00-68
. twin clutch sportronic shift transmission [check oil leaks (if necessary, check the oil level) /change]00-70
. transfer oil (check oil level/change)00-71
. reserve tank fluid (for active center differential and active yaw control system) (check fluid level)00-72
. engine coolant (change)00-73
. coolant hoses (radiator hose, heater hose) (inspect)00-74
. disk brake pads and rotors (inspect for wear)00-75
. brake hoses (check for deterioration or leaks)00-78
. ball joint and steering linkage seals (inspect for grease leaks and damage)00-78
. fuel hoses (check condition)00-63
. drive shaft boots (inspect for grease leaks and damage)00-78
. suspension system (inspect for looseness and damage)00-78
. rear axle oil (for differential part) (change)00-79
. rear axle oil (for torque transfer mechanism part) (change)00-79
. tires (rotate)00-79
. air purifier filter (replace)00-80
. air cleaner element (replace)00-63
. evaporative emission control system (except evaporative emission canister) (check for leaks and clogging)00-63
. spark plugs (replace)00-64
. intake and exhaust valve clearance (inspect and adjust)00-64
. drive belt (for the generator and power steering oil pump) (replace)00-66
. exhaust system (connections portion of muffler, muffler pipes and converter heat shields) (check and service)00-67
. engine oil (change)00-67
Manual transaxle diagnosis (manual transaxle)
Introduction22A-5
Symptom chart22A-5
Symptom procedures
Inspection procedure 1: noise, vibration22A-5
Inspection procedure 2: oil leaks22A-6
Inspection procedure 3: hard shifting22A-7
Inspection procedure 4: jumps out of gear22A-8
Troubleshooting strategy22A-5
Mark
Removal and installation51-77
Master cylinder assembly and brake booster assembly
Removal and installation35A-27
Meter and gauge (M/T)90-140
Meter and gauge (sst)90-144
MFI system (M/T)90-52
MFI system (sst)90-64
Mitsubishi communication system (mmcs)90-228
Mmcs
Diagnosis
Diagnosis function54A-382
Precautions on servicing mmcs54A-368
Service mode54A-369
Standard flow of diagnostic troubleshooting54A-368
Diagnostic trouble code chart54A-384
Diagnostic trouble code procedures
DTC B2226: and error54A-385
DTC B2240: communication error with CAN box54A-387
DTC B2477: vin not programmed54A-390
DTC U0019: bus off (b)54A-391
DTC U0141: ETACS CAN timeout54A-392
DTC U0151: agb CAN timeout54A-394
DTC U0154: ocm CAN timeout54A-396
DTC U0155: meter CAN timeout54A-397
DTC U0164: A/C CAN timeout54A-399
DTC U0168: wcm CAN timeout54A-400
DTC U0195: satellite radio CAN timeout54A-402
DTC U0197: hands free module CAN timeout54A-403
DTC U1415: coding not completed/data fail54A-405
DTC U1417: implausible coding data54A-406
ETACS function customization function54A-450
Inspection
Audio and video adapter inspection54A-455
Mitsubishi multi communication sysyem54A-366
Removal and installation54A-453
Special tools54A-367
Symptom procedures
Inspection procedure 1: No navigation screen is displayed54A-409
Inspection procedure 10: sound of a dvd (video disk) can be played, but no image is played54A-441
Inspection procedure 11: the picture and sound of external input are not played54A-443
Inspection procedure 12: check the CAN box unit power supply circuit54A-445
Inspection procedure 2: No sound is heard. (vehicles with audio amplifier)54A-415
Inspection procedure 3: No sound is heard from one of the speakers. (vehicles with audio amplifier)54A-424
Inspection procedure 4: the navigation system can be operated while the vehicle is driven54A-432
Inspection procedure 5: the screen is not normal in the navigation mode. (the own vehicle mark is dislocated.)54A-434
Inspection procedure 6: poor reception54A-437
Inspection procedure 7: gps signal can not be received.54A-438
Inspection procedure 8: cd (compact disk)/ dvd (video disk) cannot be played54A-439
Inspection procedure 9: image of a dvd (video disk) is played, but no sound is played54A-440
Trouble symptom chart54A-408
Motors and transistor
Inspection55-126
Removal and installation55-125
Multiport fuel injection (MFI) diagnosis
Actuator test reference table13A-871
Check at the engine control module (ECM)13A-872
Data list reference table13A-852
Diagnostic function13A-9
Diagnostic trouble code chart13A-44
Diagnostic trouble code procedures
DTC P0011: intake variable valve timing system target error13A-51
DTC P0012: camshaft position timing retarded13A-54
DTC P0014: exhaust variable valve timing system target error13A-55
DTC P0016: crankshaft/camshaft (intake) position sensor phase problem13A-58
DTC P0017: crankshaft/camshaft (exhaust) position sensor phase problem13A-62
DTC P0031: heated oxygen sensor (front) heater circuit low13A-66
DTC P0032: heated oxygen sensor (front) heater circuit high13A-73
DTC P0037: heated oxygen sensor (rear) heater circuit low13A-77
DTC P0038: heated oxygen sensor (rear) heater circuit high13A-84
DTC P0069: abnormal correlation between manifold absolute pressure sensor and barometric pressure sensor13A-88
DTC P0096: intake air temperature circuit range/ performance problem (sensor 2)13A-92
DTC P0097: intake air temperature circuit low input (sensor 2)13A-98
DTC P0098: intake air temperature circuit high input (sensor 2)13A-101
DTC P0101: mass airflow circuit range/ performance problem13A-107
DTC P0102: mass airflow circuit low input13A-113
DTC P0103: mass airflow circuit high input13A-120
DTC P0106: manifold absolute pressure circuit range/ performance problem13A-125
DTC P0107: manifold absolute pressure circuit low input13A-134
DTC P0108: manifold absolute pressure circuit high input13A-142
DTC P0111: intake air temperature circuit range/ performance problem (sensor 1)13A-147
DTC P0112: intake air temperature circuit low input (sensor 1)13A-153
DTC P0113: intake air temperature circuit high input (sensor 1)13A-157
DTC P0116: engine coolant temperature circuit range/ performance problem13A-163
DTC P0117: engine coolant temperature circuit low input13A-169
DTC P0118: engine coolant temperature circuit high input13A-174
DTC P0122: throttle position sensor (main) circuit low input13A-181
DTC P0123: throttle position sensor (main) circuit high input13A-185
DTC P0125: insufficient coolant temperature for closed loop fuel control13A-192
DTC P0128: coolant thermostat (coolant temperature below thermostat regulating temperature)13A-200
DTC P0131: heated oxygen sensor (front) circuit low voltage13A-203
DTC P0132: heated oxygen sensor (front) circuit high voltage13A-211
DTC P0133: heated oxygen sensor (front) circuit slow responce13A-215
DTC P0134: heated oxygen sensor (front) circuit No activity detected13A-220
DTC P0137: heated oxygen sensor (rear) circuit low voltage13A-226
DTC P0138: heated oxygen sensor (rear) circuit high voltage13A-234
DTC P0139: heated oxygen sensor (rear) circuit slow responce13A-238
DTC P0140: heated oxygen sensor (rear) circuit No activity detected13A-242
DTC P0171: system too lean13A-246
DTC P0172: system too rich13A-252
DTC P0181: fuel tank temperature sensor circuit range/ performance13A-258
DTC P0182: fuel tank temperature sensor circuit low input13A-265
DTC P0183: fuel tank temperature sensor circuit high input13A-270
DTC P0201: injector cylinder 113A-277
DTC P0202: injector cylinder 213A-287
DTC P0203: injector cylinder 313A-297
DTC P0204: injector cylinder 413A-307
DTC P0222: throttle position sensor (sub) circuit low input13A-317
DTC P0223: throttle position sensor (sub) circuit high input13A-323
DTC P0234: turbocharger wastegate system malfunction13A-328
DTC P0243: turbocharger wastegate solenoid 1 circuit13A-330
DTC P0247: turbocharger wastegate solenoid 2 circuit13A-337
DTC P0300: random/multiple cylinder misfire detected13A-343
DTC P0301: cylinder 1 misfire detected13A-348
DTC P0302: cylinder 2 misfire detected13A-351
DTC P0303: cylinder 3 misfire detected13A-354
DTC P0304: cylinder 4 misfire detected13A-357
DTC P0327: knock sensor circuit low13A-361
DTC P0328: knock sensor circuit high13A-364
DTC P0335: crankshaft position sensor circuit13A-367
DTC P0340: intake camshaft position sensor circuit.13A-377
DTC P0365: exhaust camshaft position sensor circuit13A-385
DTC P0420: warm up catalyst efficiency below threshold13A-394
DTC P0441: evaporative emission control system incorrect purge flow13A-396
DTC P0442: evaporative emission system leak detected (small leak)13A-400
DTC P0443: evaporative emission purge solenoid circuit
Multiport fuel injection (MFI)13A-412
Multiport fuel injection (MFI)13A-463
DTC P0446: evaporative emission ventilation solenoid circuit
Multiport fuel injection (MFI)13A-419
Multiport fuel injection (MFI)13A-470
DTC P0450: fuel tank differential pressure sensor malfunction
Multiport fuel injection (MFI)13A-426
Multiport fuel injection (MFI)13A-477
DTC P0451: fuel tank differential pressure circuit range/performance problem
Multiport fuel injection (MFI)13A-435
Multiport fuel injection (MFI)13A-485
DTC P0452: fuel tank differential pressure circuit low input
Multiport fuel injection (MFI)13A-444
Multiport fuel injection (MFI)13A-494
DTC P0453: fuel tank differential pressure circuit high input
Multiport fuel injection (MFI)13A-455
Multiport fuel injection (MFI)13A-504
DTC P0455: evaporative emission system leak detected (gross leak)13A-512
DTC P0456: evaporative emission system leak detected (very small leak)13A-523
DTC P0461: fuel level sensor (main) circuit range/ performance13A-534
DTC P0462: fuel level sensor circuit low input13A-537
DTC P0463: fuel level sensor circuit high input13A-540
DTC P0500: vehicle speed signal malfunction13A-542
DTC P0506: idle control sytem rpm lower than expected13A-545
DTC P0507: idle control sytem rpm higher than expected13A-548
DTC P0513: immobilizer malfunction13A-551
DTC P0551: power steering pressure switch circuit range/ performance13A-553
DTC P0554: power steering pressure switch circuit intermittent13A-560
DTC P0603: EEPROM malfunction13A-564
DTC P0606: engine control module main processor malfunction13A-566
DTC P0622: generator fr terminal circuit malfunction13A-568
DTC P0630: vehicle identification number (vin) malfunction13A-573
DTC P0638: throttle actuator control motor circuit range/performance13A-575
DTC P0642: throttle position sensor power supply13A-579
DTC P0657: throttle actuator control motor relay circuit malfunction13A-581
DTC P0830: clutch pedal position switch circuit range/ performance13A-589
DTC P1021: intake engine oil control valve circuit13A-594
DTC P1025: exhaust engine oil control valve circuit.13A-601
DTC P1231: active stability control plausibility13A-607
DTC P1232: fail safe system13A-609
DTC P1233: throttle position sensor (main) plausibility13A-610
DTC P1234: throttle position sensor (sub) plausibility13A-614
DTC P1235: mass airflow sensor plausibility13A-617
DTC P1236: a/d converter13A-620
DTC P1237: accelerator pedal position sensor plausibility13A-621
DTC P1238: mass airflow sensor plausibility (torque monitor)13A-624
DTC P1239: engine rpm plausibility13A-628
DTC P1240: ignition angle13A-630
DTC P1241: torque monitor13A-631
DTC P1242: fail safe control monitor13A-635
DTC P1243: inquiry/response error13A-637
DTC P1244: ram test for all area13A-638
DTC P1245: cycle ram test (engine)13A-639
DTC P1247: sst plausibility (sst)13A-640
DTC P1320: ignition timing retard insufficient13A-641
DTC P1506: idle control system rpm lower than expected at low temperature13A-644
DTC P1507: idle control system rpm higher than expected at low temperature13A-647
DTC P1590: tcm to ECM communication error in torque reduction request13A-650
DTC P1603: battery backup circuit malfunction13A-653
DTC P1676: variant coding13A-657
DTC P2066: fuel level sensor (sub) circuit range/ performance13A-659
DTC P2100: throttle actuator control motor circuit (open)13A-663
DTC P2101: throttle actuator control motor magneto malfunction13A-668
DTC P2122: accelerator pedal position sensor (main) circuit low input13A-672
DTC P2123: accelerator pedal position sensor (main) circuit high input13A-677
DTC P2127: accelerator pedal position sensor (sub) circuit low input13A-682
DTC P2128: accelerator pedal position sensor (sub) circuit high input13A-687
DTC P2135: throttle position sensor (main and sub) range/performance problem13A-691
DTC P2138: accelerator pedal position sensor (main and sub) range/performance problem13A-697
DTC P2195: heated oxygen sensor (front) inactive13A-704
DTC P2228: barometric pressure circuit low input13A-707
DTC P2229: barometric pressure circuit high input13A-709
DTC P2252: heated oxygen sensor offset circuit low voltage13A-711
DTC P2253: heated oxygen sensor offset circuit high voltage13A-713
DTC P2263: intake charge system malfunction13A-715
DTC U0001: bus off13A-718
DTC U0101: ECU out13A-719
DTC U0121: ECU out13A-723
DTC U0141: ECU out13A-727
DTC U0167: immobilizer communication error13A-731
DTC U1180: combination meter out13A-733
safe function reference table13A-40
General scan tool (gst) mode 01 reference table13A-866
Inspection procedure using an oscilloscope13A-881
Symptom chart13A-48
Symptom procedures
Inspection procedure 1: communication with ECM only is not possible13A-737
Inspection procedure 10: when the engine is cold, it stalls at idle (die out)13A-766
Inspection procedure 11: when the engine is hot, it stalls at idle (die out)13A-769
Inspection procedure 12: the engine stalls accelerating (pass out)13A-772
Inspection procedure 13: the engine stalls decelerating13A-774
Inspection procedure 14: hesitation, sag, stumble, poor acceleration or surge13A-776
Inspection procedure 15: acceleration shock13A-779
Inspection procedure 16: knocking13A-781
Inspection procedure 17: too high co and hc concentration when idling13A-782
Inspection procedure 18: transient, mass emission tailpipe test failure13A-785
Inspection procedure 19: purge flow test of the evaporative emission canister failure13A-789
Inspection procedure 2: the malfunction indicator lamp (service engine soon or check engine lamp) does not illuminate right after the ignition switch is turned to the ON position13A-741
Inspection procedure 20: pressure test of the evaporative system failure13A-789
Inspection procedure 21: generator output voltage is low (approximately 12.3 volts)13A-791
Inspection procedure 22: power supply system and ignition ig system13A-794
Inspection procedure 23: fuel pump system13A-805
Inspection procedure 24: ignition st system and starter relay system (M/T)13A-818
Inspection procedure 25: ignition st system and starter relay system (sst)13A-830
Inspection procedure 26: ignition circuit system13A-842
Inspection procedure 27: A/C system13A-847
Inspection procedure 28: engine oil pressure switch system13A-849
Inspection procedure 3: the malfunction indicator lamp (service engine soon or check engine lamp) remains illuminated and never goes out13A-742
Inspection procedure 4: cranks, won?t start13A-744
Inspection procedure 5: starts up and dies13A-751
Inspection procedure 6: hard starting13A-755
Inspection procedure 7: unstable idle (rough idle, hunting)13A-760
Inspection procedure 8: idle speed is high (improper idle speed)13A-764
Inspection procedure 9: idle speed is low (improper idle speed)13A-765
Troubleshooting strategy13A-9

O

Oil cooler
Removal and installation22C-347
Oil pan
Inspection11A-54
Removal and installation11A-51
Oil pan and timing chain case
Removal and installation11B-27
Oil pump
Removal and installation12-12
Oil pump chain
Inspection11B-61
Removal and installation
Engine overhaul11B-56
Engine lubrication12-10
On-vehicle service
A/C compressor clutch test55-113
Accuracy check of occupant classification sensor52B-378
Acd operation check
Manual transaxle22A-119
Twin sportronic shift transmission (sst)22C-333
Antenna communication test42B-275
tensioner check11A-8
Ayc bleeding27-30
Ayc differential carrier oil seal replacement27-34
Ayc operation check27-31
Ball joint dust cover check33-8
Ball joint dust cover inspection34-10
Bleeding
Manual transaxle22A-118
Twin sportronic shift transmission (sst)22C-332
Basic brake system35A-16
Brake booster operation check35A-15
Brake drag force check35A-24
Brake fluid level switch check35A-17
Brake pad check35A-17
Brake pad replacement35A-18
Brake pedal check and adjustment35A-12
Calibration of cut valve and inlet valve35C-269
Charging55-114
Check valve operation check35A-16
Clutch bleeding21A-3
Clutch pedal check21A-2
Component location13A-891
Compression pressure check11A-15
Compressor drive belt adjustment55-114
Compressor noise check55-117
Cooling fan motor check14-21
Cooling fan relay continuity check14-19
Curb idle speed check11A-12
Customization function
Keyless operation system (kos)42B-276
Wireless control module (wcm)42C-126
Disk brake rotor check35A-21
Drive belt tension check11A-8
Drive belt tension check and adjustment37-17
Engine coolant change14-17
Engine coolant concentration test14-18
Engine coolant leak check14-16
Engine coolant temperature sensor check13A-907
Engine oil check12-4
Engine oil control valve check13A-912
Engine oil filter replacement12-5
Engine oil replacement12-5
Evaporative emission purge solenoid check13A-913
Evaporative emission ventilation solenoid check13A-913
Fluid check
Manual transaxle22A-118
Twin sportronic shift transmission (sst)22C-332
Fluid level check
Rear axle27-29
Power steering37-17
Fluid replacement37-18
Front wheel alignment check and adjustment33-7
Fuel level sensor (sub) check13B-6
Fuel level sensor (sub) replacement13B-9
Fuel pressure test13A-897
Fuel pump circuit resistor check13A-906
Fuel pump connector disconnection
(how to reduce pressurized fuel pressure)13A-901
Fuel pump module replacement13B-6
Fuel pump operation check
Multiport fuel injection (MFI)13A-901
Fuel supply13B-6
Fuel pump relay continuity check13A-903
G and yaw rate sensor calibration35C-266
Gear oil level check27-28
Gear oil replacement27-29
Heated oxygen sensor check13A-908
Hub bolt replacement
Front axle26-8
Rear axle27-34
Hydraulic pressure check
Manual transaxle22A-119
Twin sportronic shift transmission (sst)22C-333
Hydraulic unit check35C-263
Id codes registration procedure42C-114
Id codes registration procedures42B-265
Idle mixture check11A-13
up operation check55-118
Ignition timing check11A-10
In the event of a discharged battery35C-266
Injector check13A-910
Injector relay continuity check13A-905
Inspection of keyless entry timer lock function
Keyless operation system (kos)42B-275
Wireless control module (wcm)42C-125
Intake air temperature sensor check13A-906
Intake charge pressure check15-5
Intake charge pressure control system check15-7
Key interlock mechanism check22C-330
Keyless entry system check
Keyless operation system (kos)42B-275
Wireless control module (wcm)42C-125
Lower arm ball joint looseness check33-8
Manifold vacuum check
Engine mechanical11A-16
Intake and exhaust15-5
Master cylinder brake fluid pressure sensor calibration.35C-268
Multiport fuel injection (MFI) relay continuity check13A-903
Oil pressure check
Engine lubrication12-6
Rear axle27-32
Oil pump pressure test37-20
TSB Revision
ALPHABETICAL INDEX 17
Parking brake lever stroke check and adjustment36-11
Parking brake lining seating procedure36-12
Parking brake switch check36-12
Performance test55-115
Power relay check55-117
Power steering pressure switch check37-21
Power steering system air bleeding37-19
Radiator cap opening pressure check14-16
Rear axle total backlash check27-27
Rear wheel alignment check and adjustment34-9
Refrigerant leak repair procedure55-116
Refrigerant level test55-113
Replace the clean air filter55-119
Shift lever operation check22C-330
Shift lock mechanism check22C-332
Simple inspection of the A/C pressure sensor55-113
Stationary steering effort check37-16
Steering angle check37-14
Steering wheel free play check37-14
Steering wheel return to center check37-17
Steering wheel sensor calibration35C-267
Throttle actuator control motor check13A-911
Throttle actuator control motor relay continuity check13A-905
Throttle body (throttle valve area) cleaning13A-897
Tie rod end ball joint breakaway torque check37-15
Tie rod end ball joint dust cover check37-15
Timing chain elongation visual check11A-17
Tire inflation pressure check31-8
Tire wear check31-8
TPMS transmitter check
Keyless operation system (kos)42B-275
Wireless control module (wcm)42C-125
TPMS transmitter id check
Keyless operation system (kos)42B-275
Wireless control module (wcm)42C-125
Transfer oil change
Manual transaxle22A-117
Twin sportronic shift transmission (sst)22C-329
Transfer oil check
Manual transaxle22A-117
Twin sportronic shift transmission (sst)22C-329
Transmission oil change
Manual transaxle22A-116
Twin sportronic shift transmission (sst)22C-328
Transmission oil level check
Manual transaxle22A-116
Twin sportronic shift transmission (sst)22C-328
Turbocharger bypass valve check15-9
Turbocharger waste gate solenoid check15-8
Turbocharger wastegate actuator check15-6
Valve clearance check and adjustment11A-10
Water pump coolant leak check14-18
Wheel bearing end play check
Front axle26-7
Rear axle27-33
Wheel runout check31-8
Other devices70-3
Output shaft22B-29
Output shaft
Disassembly and assembly22B-29
Inspection22B-35
Overall configuration diagram80A-2

P

Paddle shift assembly
Inspection
Paddle shift switch check22C-348
Removal and installation22C-348
Panic alarm
Diagnosis
Diagnostic function54A-709
Standard flow of diagnostic troubleshooting54A-709
General information54A-707
On-vehicle service
Customization function54A-712
Removal and installation54A-712
Special tools54A-708
Symptom procedures
Panic alarm does not work normally54A-710
Trouble symptom chart54A-710
Parking brake cable
Removal and installation36-15
Parking brake diagnosis
Introduction36-3
Symptom chart36-3
Symptom procedures
Inspection procedure 1: insufficient parking brake function36-3
Inspection procedure 2: when the parking brake lever is pulled, the brake warning light does not illuminate36-4
Inspection procedure 3: when the parking brake lever is released, the brake warning light does not turn off36-7
Troubleshooting strategy36-3
Parking brake lever
Removal and installation36-13
Parking brake lining and drum
Inspection36-20
Removal and installation36-17
Parking brake reminder tone alarm90-344
Passenger’s (front) air bag module
Inspection52B-397
Removal and installation52B-393
Piston and connecting rod
Inspection11B-70
Removal and installation11B-62
collision diagnosis52B-371
Power distribution system90-28
Power steering diagnosis
Introduction to power steering diagnosis37-4
Power steering diagnosis troubleshooting strategy37-4
Symptom chart37-4
Symptom procedures
Inspection procedure 1: excessive play of steering wheel37-5
Inspection procedure 10: oil leakage from hose connection37-10
Inspection procedure 11: oil leakage from hose assembly37-11
Inspection procedure 12: oil leakage from oil reservoir37-11
Inspection procedure 13: oil leakage from oil pump37-11
Inspection procedure 14: oil leakage from steering gear37-12
Inspection procedure 2: difficult steering wheel operation (insufficient power assist)37-6
Inspection procedure 3: rattling noise37-7
Inspection procedure 4: shrill noise37-8
Inspection procedure 5: squealing noise37-8
Inspection procedure 6: hissing noise37-8
Inspection procedure 7: droning noise37-9
Inspection procedure 8: squeaking noise37-9
Inspection procedure 9: vibration37-10
Power steering gear box and linkage
Disassembly and reassembly37-36
Inspection37-35
Removal and installation37-31
Power steering hoses
Removal and installation37-40
Power steering oil pump assembly
Removal and installation37-38
Power windows90-156
Precautions before service
Application of corrosion agents and undercoats00-38
Bolts and nuts with stabilizer for coefficient of friction00-47
Cautions for working in engine compartment00-26
Coding list00-39
Engine idling learning procedure00-32
How to perform vehicle identification number (vin) writing00-27
Initialization procedure for learning value in MFI engine00-31
Scan tool (multi use tester { M.U.T.III } sub assembly).00-39
Servicing electrical system00-37
Supplemental restraint system (SRS)00-26
Timing chain maintenance00-33
Vehicle washing00-38
Precautions on how to repair the CAN bus lines54C-8
Propeller shaft
Disassembly and assembly25-9
Inspection25-8
Removal and installation25-6
Propeller shaft diagnosis
Introduction to propeller shaft diagnosis25-3
Propeller shaft diagnostic troubleshooting strategy25-3
Symptom chart25-4
Symptom procedures
Inspection procedure 1: noise at start25-4
Inspection procedure 2: noise and vibration at high speed25-4

R

Radiator
Removal and installation14-31
Radio and cd player
Diagnosis
Diagnosis function54A-285
Introduction to audio system diagnosis54A-283
Standard flow of diagnostic troubleshooting54A-285
Diagnostic trouble code chart54A-288
Diagnostic trouble code procedures
DTC B2420: power integrated circuit54A-304
DTC B2421: radio tuner54A-305
DTC B2423: 6cd player error54A-307
DTC B2424: cd player error54A-309
DTC B2450: switch panel communication54A-311
DTC B2451: audio panel type error54A-315
DTC U0019: bus off (b)54A-288
DTC U0141: ETACS CAN timeout54A-290
DTC U0151: abg CAN timeout54A-291
DTC U0154: ocm CAN timeout54A-293
DTC U0155: meter CAN timeout54A-294
DTC U0164: A/C CAN timeout54A-296
DTC U0168: wcm CAN timeout54A-297
DTC U0195: satellite radio CAN timeout54A-299
DTC U0197: hands free module CAN timeout54A-300
DTC U1415: coding not completed/data fail54A-302
General information54A-281
Inspection
Audio adapter inspection54A-365
On-vehicle service
Adjustment of volume and sound quality automatic correction function54A-363
Removal and installation54A-364
Service data54A-363
Special tools54A-282
Symptom procedures
Inspection procedure 1: power is not turned on when the power switch is turned on54A-318
Inspection procedure 10: noise is overpowering both am and fm54A-352
Inspection procedure 11: excessive noise on am and fm.54A-352
Inspection procedure 12: noise is detected with engine running54A-353
Inspection procedure 13: noise appears during vibration or shocks54A-354
Inspection procedure 14: noise is present while moving (fm)54A-355
Inspection procedure 15: constant noise54A-356
Inspection procedure 16: No reception (am)54A-356
Inspection procedure 17: poor reception54A-357
Inspection procedure 18: distortion on am and/or fm.54A-358
Inspection procedure 19: distortion on fm only54A-359
Inspection procedure 2: No sound is heard. (vehicles with audio amplifier)54A-322
Inspection procedure 20: auto select function inoperative, too few automatic stations are selected54A-359
Inspection procedure 21: preset stations are erased.54A-360
Inspection procedure 22: cd can not be inserted54A-360
Inspection procedure 23: No sound. (cd only)54A-361
Inspection procedure 24: cd sound skips54A-361
Inspection procedure 25: sound quality is poor54A-362
Inspection procedure 26: cd can not be ejected54A-362
Inspection procedure 3: No sound is heard from one of the speakers. (vehicles with audio amplifier)54A-333
Inspection procedure 3: No sound is heard from one of the speakers. (vehicles without audio amplifier)54A-328
Inspection procedure 4: the audio does not operate normally by operating the radio and cd player of the center panel unit54A-340
Inspection procedure 5: audio illuminations does not work normally54A-344
Inspection procedure 6: the sound of external input are not played54A-348
Inspection procedure 7: noise is present while moving (am)54A-350
Inspection procedure 8: noise is present while moving (fm)54A-350
Inspection procedure 9: sound mixed with noise, only at night (am)54A-351
Trouble symptom chart54A-317
Rear axle diagnosis (ayc)
Actuator test reference table27-22
Check at ECU27-22
Data list reference table27-22
Diagnostic function27-6
Diagnostic trouble code chart27-8
Inspection procedure for diagnosis code
Code No. C1619 ayc current value abnormality27-9
Code No. c161a ayc direction valve (rh) output error27-13
Code No. c161b ayc direction valve (lh) output error.27-17
Code No. C1620 ayc control abnormality27-21
Inspection procedure for trouble symptoms
Inspection procedure 1: abnormal noise from ayc differential (torque transfer mechanism) during cornering27-22
Standard flow of diagnostic troubleshooting27-6
Trouble symptom chart27-22
Rear axle diagnosis (except ayc)
Inspection procedure for trouble symptoms
Inspection procedure 1: noise during wheel rotation (driveshaft)27-5
Inspection procedure 8: oil leakage (differential)27-5
Introduction27-4
Symptom chart27-4
Troubleshooting strategy27-4
Rear axle hub assembly
Inspection27-39
Removal and installation27-36
Rear bumper assembly
Removal and installation51-6
Rear combination light
Diagnosis
Diagnostic function54A-194
Standard flow of diagnostic troubleshooting54A-194
Diagnostic trouble code chart54A-196
Diagnostic trouble code procedures
DTC b16a0: taillight (rh) circuit open (open circuit in taillight (rh) or position light (rh))54A-197
DTC b16a7: taillight (rh) circuit short (short circuit in taillight (rh) or position light (rh))54A-197
DTC b16a1: taillight (lh) circuit open (open circuit in taillight (lh), position light (lh), or license plate light)54A-203
DTC b16a8: taillight (lh) circuit short (short circuit in taillight (lh), position light (lh), or license plate light)54A-203
General information54A-192
Rear combination light removal and installation54A-216
Special tools54A-192
Symptom procedures
Inspection procedure 1: all the taillights do not illuminate54A-209
Inspection procedure 2: one of the headlights does not illuminate54A-212
Taillight removal and installation54A-217
Trouble symptom chart54A-209
Rear disc brake assembly
Disassembly and assembly35A-40
Inspection
Basic brake system35A-39
Basic brake system35A-41
Removal and installation35A-38
Rear roll stopper and crossmember
Removal and installation32-10
Rear spoiler
Removal and installation51-17
Rear suspension crossmember
Removal and installation34-30
Rear suspension diagnosis
Introduction to rear suspension diagnosis34-6
Rear suspension diagnostic troubleshooting strategy34-6
Symptom chart34-6
Symptom procedures
Inspection procedure 1: squeaks or other abnormal noise34-6
Inspection procedure 2: poor ride34-7
Inspection procedure 3: body tilting34-7
Rear window defogger90-208
Receiver antenna assembly
Removal and installation42C-137
Recommended lubricants and lubricant capacities table00-56
Refrigerant line
Removal and installation55-136
Relay70-2
Remote controlled mirror90-206
Reverse idler gear
Disassembly and assembly22B-37
Inspection22B-39

S

Satellite radio tuner
Diagnosis
Diagnosis function54A-537
Introduction to satellite radio diagnosis54A-537
Standard flow of diagnostic troubleshooting54A-537
Diagnostic trouble code chart54A-540
Diagnostic trouble code procedures
DTC B2222: radio receiver internal fail54A-540
DTC U0019: bus off (b)54A-542
DTC U0141: ETACS CAN timeout54A-543
DTC U0151: abg CAN timeout54A-545
DTC U0154: ocm CAN timeout54A-546
DTC U0155: meter CAN timeout54A-548
DTC U0164: A/C CAN timeout54A-549
DTC U0168: wcm CAN timeout54A-551
DTC U0184: audio CAN timeout54A-552
DTC U0197: hands free module CAN timeout54A-554
General information54A-536
On-vehicle service
How to read sirius id54A-565
Removal and installation54A-565
Special tools54A-536
Symptom procedures54A-556
Symptom procedures
Inspection procedure 1: a satellite radio cannot be received54A-556
Inspection procedure 2: check the satellite radio tuner power supply circuit54A-561
Inspection procedure 3: the error code antenna error is displayed on the display54A-564
Trouble symptom chart54A-555
Scheduled maintenance table00-59
Sealant
Engine lubrication12-3
Engine cooling14-3
Propeller shaft25-3
Sealant and adhesive
Multiport fuel injection (MFI)13A-6
Rear axle27-4
Sealants
Engine mechanical11A-4
Power steering37-3
Sealants and adhesives
Engine overhaul11B-7
Manual transaxle overhaul22B-4
Seat assembly
Front seat assembly
Disassembly and assembly52A-24
Inspection52A-22
Removal and installation52A-20
Rear seat assembly
Disassembly and assembly52A-27
Removal and installation52A-25
Seat belt
Front seat belt
Inspection52A-29
Removal and installation52A-28
Rear seat belt
Removal and installation52A-30
Seat belt warning tone alarm90-336
Seat belts with pre-tensioner
Inspection52B-416
Removal and installation52B-413
Select lever
Disassembly and assembly22B-43
Sensor70-8
Sensor, switch and relay
Inspection
Awc switch check22A-133
Electric pump relay check22A-133
Removal and installation
Manual transaxle22A-132
Twin sportronic shift transmission (sst)22C-349
Service precautions
Supplemental restraint system (SRS)52B-25
Controller area network (CAN)54C-7
Service precautions
Caution label55-6
Service specification
Intake and exhaust15-2
Manual transaxle22A-2
Propeller shaft25-3
Service specification(s)
Engine lubrication12-2
Multiport fuel injection (MFI)13A-6
Clutch21A-2
Service specifications
Engine mechanical11A-3
Engine overhaul11B-2
Engine cooling14-2
Clutch overhaul21B-2
Manual transaxle overhaul22B-3
Front axle26-4
Rear axle27-3
Wheel and tire31-2
Front suspension33-3
Rear suspension34-5
Basic brake system35A-3
Active skid control system (ASC)35C-6
Parking brakes36-2
Power steering37-3
Keyless operation system (kos)42B-8
Wireless control module (wcm)42C-4
Heater, air conditioning and ventilation55-5
Shift lock mechanism90-80
Shock absorber assembly
Disassembly and assembly34-25
Removal and installation34-24
Side air dam
Removal and installation51-14
Side impact sensor
Inspection52B-404
Removal and installation52B-402
Side signal turn-light
Removal and installation54A-237
Side-airbag module(s)
Inspection52B-408
Removal and installation52B-405
Solenoid and solenoid valve70-14
Spare connector (for navigation system)90-240
Spare connector (purpose)90-357
Speaker
General information54A-570
On-vehicle service
Speaker test (vehicles with mmcs)54A-575
Speaker test (vehicles with radio and cd player)54A-573
Removal and installation54A-575
Special tool
Multiport fuel injection (MFI)13A-7
Propeller shaft25-5
Rear axle27-23
Power plant mount32-3
Parking brakes36-10
Keyless operation system (kos)42B-8
Wireless control module (wcm)42C-5
Interior52A-2
Special tools
Engine mechanical11A-5
Engine overhaul11B-8
Engine lubrication12-4
Fuel supply13B-5
Engine cooling14-14
Intake and exhaust15-4
Clutch overhaul21B-3
Manual transaxle22A-3
Manual transaxle overhaul22B-8
Twin sportronic shift transmission (sst)22C-4
Front axle26-6
Front suspension33-6
Rear suspension34-8
Basic brake system35A-12
Active skid control system (ASC)35C-262
Power steering37-12
Supplemental restraint system (SRS)52B-369
Local interconnect network (lin)54B-3
Controller area network (CAN)54C-5
Heater, air conditioning and ventilation55-111
Specification(s)51-2
Specification(s)
Adhesive51-2
Lubricant51-2
Service specifications51-2
Splash shield
Removal and installation42A-13
SRS air bag diagnosis
Accuracy check of occupant classification sensor
reference table52B-368
Actuator test reference table52B-368
Data list reference table52B-367
Diagnostic function52B-28
Diagnostic trouble code chart
(occupant ECU)52B-297
Diagnostic trouble code chart (ECU)52B-31
Diagnostic trouble code procedures (occupant classification-ECU)
DTC b1b78: passenger seat weight sensor (front: lh) performance52B-300
DTC b1b7d: passenger seat weight sensor (front: rh) performance52B-300
DTC b1b82: passenger seat weight sensor (rear: lh) performance52B-300
DTC b1b87: passenger seat weight sensor (rear: rh) performance52B-300
DTC b1b79: passenger seat weight sensor (ground side) circuited (front: lh)52B-304
DTC b1b7e: passenger seat weight sensor (ground side) circuited (front: rh)52B-304
DTC b1b83: passenger seat weight sensor (ground side) circuited (rear: lh)52B-304
DTC b1b88: passenger seat weight sensor (ground side) circuited (rear: rh)52B-304
DTC b1b7a: passenger seat weight sensor(power supply side) circuited or open (front: lh)52B-308
DTC b1b7f: passenger seat weight sensor(power supply side) circuited or open (front: rh)52B-308
DTC b1b84: passenger seat weight sensor (power supply side) circuited or open (front: rh)52B-308
DTC b1b89: passenger seat weight sensor (power supply side) circuited or open (front: rh)52B-308
DTC b1b8c: seat slide sensor circuit performance52B-312
DTC b1b8d: seat slide sensor open circuit52B-316
DTC b1b8e: seat slide sensor (power supply side) short circuit52B-319
DTC b1b91: driver seat slide sensor configuration mismatch52B-322
DTC b1ba7: occupant classification system verification required52B-323
DTC b1ba8: occupant ECU out of calibration not/calibrated52B-325
DTC b1bba: passenger seat weight sensor power supply circuit52B-326
DTC b1bbc: occupant classification system negative system weight52B-328
DTC b1bbd: occupant ECU current configuration table unprogrammed52B-330
DTC b1c23: passenger seat weight sensor (front: lh) configuration mismatch52B-331
DTC b1c24: passenger seat weight sensor (front: rh) configuration mismatch52B-331
DTC b1c25: passenger seat weight sensor (rear: lh) configuration mismatch52B-331
DTC b1c26 passenger seat weight sensor (rear: rh) configuration mismatch52B-331
DTC b1cb2: occupant ECU parameter table incompatible52B-333
DTC B2212: occupant ECU internal failure52B-333
DTC B2250: occupant ECU not parameter flash required52B-333
DTC B2262: occupant ECU electrostatic discharge event detected52B-333
DTC b210d: battery voltage lowDTC b210e: battery voltage high52B-335
DTC B2206: chassis number does not match52B-339
DTC U0020: b bus off performance52B-341
DTC U0021: b bus (hi) circuit open52B-341
DTC U0022: b bus (hi) shorted to circuit ground52B-341
DTC U0023: b bus (hi) shorted to circuit power supply52B-341
DTC U0024: b bus (lo) circuit open52B-341
DTC U0025: b bus (lo) shorted to circuit ground52B-341
DTC U0026: b bus (lo) shorted to circuit power supply52B-341
DTC U0141: ETACS CAN timeout52B-343
DTC U0151: ECU CAN timeout52B-344
DTC U0155: combination meter CAN timeout52B-346
DTC U0164: A/ECU CAN timeout52B-347
DTC U0168: ECU or wcm CAN timeout52B-349
DTC U0184: audio CAN timeout52B-350
DTC U0195: satellite radio tuner CAN timeout52B-352
DTC U0197: hands free module CAN timeout52B-353
DTC U0245: audio visual navigation unit CAN timeout52B-355
DTC U1419: the signal from a weight sensor (front: lh) is unusual52B-356
DTC u141a: the signal from a weight sensor (front: rh) is unusual52B-356
DTC u141b: the signal from a weight sensor (rear: lh) is unusual52B-356
DTC u141c: the signal from a weight sensor (rear: rh) is unusual52B-356
Diagnostic trouble code procedures (SRS-ECU)
DTC B1206: passengers air bag off indicator light (open circuit)52B-35
DTC B1207: passengers air bag off indicator light (short circuit between circuit terminal)52B-38
DTC b1b00: driver’s air bag module (1st squib) system (shorted to squib circuit ground)52B-42
DTC b1b04: driver’s air bag module (2nd squib) system (shorted to squib circuit ground)52B-42
DTC b1b01: driver’s air bag module (1st squib) system (shorted to squib circuit power supply)52B-49
DTC b1b05: driver’s air bag module (2nd squib) system (shorted to squib circuit power supply52B-49
DTC b1b02: driver’s air bag module (1st squib) system (squib circuit open)52B-56
DTC b1b06: driver’s air bag module (2nd squib) system (squib circuit open)52B-56
DTC b1b03: driver’s air bag module (1st squib) system (short circuit between squib circuit terminals)52B-63
DTC b1b07: driver’s air bag module (2nd squib) system (short circuit between squib circuit terminals)52B-63
DTC b1b08: passenger’s (front) air bag module (1st squib) system (shorted to squib circuit ground)52B-71
DTC b1b0c: passenger’s (front) air bag module (2nd squib) system (shorted to squib circuit ground)52B-71
DTC b1b09: passenger’s (front) air bag module (1st squib) system (shorted to squib circuit power supply)52B-77
DTC b1b0d: passenger’s (front) air bag module (2nd squib) system (shorted to squib circuit power supply52B-77
DTC b1b0a: passenger’s (front) air bag module (1st squib) system (squib circuit open)52B-83
DTC b1b0e: passenger’s (front) air bag module (2nd squib) system (squib circuit open)52B-83
DTC b1b0b: passenger’s (front) air bag module (1st squib) system (short circuit between squib circuit terminals)52B-88
DTC b1b0f: passenger’s (front) air bag module (2nd squib) system (short circuit between squib circuit terminals)52B-88
DTC b1b10: driver’s knee air bag (squib) system (shorted to squib circuit ground)52B-95
DTC b1b11: driver’s knee air bag (squib) system (shorted to squib circuit power supply)52B-100
DTC b1b12: driver’s knee air bag (squib) system (squib circuit open)52B-105
DTC b1b13: driver’s knee air bag (squib) system (short circuit between squib circuit terminals)52B-110
DTC b1b18: curtain air bag module (lh) (squib) system (shorted to squib circuit ground)52B-116
DTC b1b19: curtain air bag module (lh) (squib) system (shorted to squib circuit power supply)52B-122
DTC b1b1a: curtain air bag module (lh) (squib) system (squib circuit open)52B-128
DTC b1b1b: curtain air bag module (lh) (squib) system (short circuit between squib circuit terminals)52B-134
DTC b1b20: curtain air bag module (rh) (squib) system (shorted to squib circuit ground)52B-140
DTC b1b21: curtain air bag module (rh) (squib) system (shorted to squib circuit power supply)52B-146
DTC b1b22: curtain air bag module (rh) (squib) system (squib circuit open)52B-152
DTC b1b23: curtain air bag module (rh) (squib) system (short circuit between squib circuit terminals)52B-158
DTC b1b54: seat belt switch (rh) circuit (ground side) shorted52B-164
DTC b1b55: seat belt switch (rh) circuit (power supply side) shorted52B-164
DTC b1b56: seat belt switch (rh) circuit open52B-164
DTC b1b70: malfunction of sensor inside front impact sensor (lh)52B-169
DTC b1b71: malfunction of sensor inside front impact sensor (rh)52B-169
DTC b1b72: malfunction of sensor inside side impact sensor (lh)52B-170
DTC b1b75: malfunction of sensor inside side impact sensor (rh)52B-170
DTC b1ba3: driver?s seat slide sensor malfunction (occupant ECU)52B-172
DTC b1ba5: ECU squib count mismatch52B-174
DTC b1baa: occupant ECU configuration mismatch52B-175
DTC b1bc7: ECU (record data full) system52B-177
DTC b1c27: air bag module (lh) (squib) system (shorted to squib circuit ground)52B-178
DTC b1c28: air bag module (lh) (squib) system (shorted to squib circuit power supply)52B-183
DTC b1c29: air bag module (lh) (squib) system (squib circuit open)52B-187
DTC b1c2a: air bag module (lh) (squib) system (short circuit between squib circuit terminals)52B-191
DTC b1c2b: air bag module (rh) (squib) system (shorted to squib circuit ground)52B-195
DTC b1c2c: air bag module (rh) (squib) system (shorted to squib circuit power supply)52B-200
DTC b1c2d: air bag module (rh) (squib) system (squib circuit open)52B-204
DTC b1c2e: air bag module (rh) (squib) system (short circuit between squib circuit terminals)52B-208
DTC b1c38: driver’s tensioner (squib) system (shorted to squib circuit ground)52B-212
DTC b1c39: driver’s tensioner (squib) system (shorted to squib circuit power supply)52B-218
DTC b1c3a: driver’s tensioner (squib) system (squib circuit open)52B-222
DTC b1c3b: driver’s tensioner (squib) system (short circuit between squib circuit terminals)52B-228
DTC b1c47: front passenger’s tensioner (squib) system (shorted to squib circuit ground)52B-234
DTC b1c48: front passenger’s tensioner (squib) system (shorted to squib circuit power supply)52B-239
DTC b1c49: front passenger’s tensioner (squib) system (squib circuit open)52B-243
DTC b1c4a: front passenger’s tensioner (squib) system (short circuit between squib circuit terminals)52B-249
DTC b210d: battery abnormal low voltage52B-255
DTC b212c: open circuit to ig1 power supply (fuse No.12 circuit)52B-260
DTC b212d: open circuit to ig1 power supply (fuse No.18 circuit)52B-260
DTC b2207: occupant restraint controller internal 152B-265
DTC b2208: occupant restraint controller internal 252B-265
DTC b2209: occupant restraint controller internal 352B-265
DTC b220a: occupant restraint controller internal 452B-265
DTC b220b: occupant restraint controller firing stored energy52B-265
DTC b220c: occupant restraint controller accelerometer 152B-265
DTC b220d: occupant restraint controller accelerometer 252B-265
DTC b223d: ocm (occupant ECU) DTC present52B-267
DTC U0019: bus off (b)52B-268
DTC U0141: ETACS CAN timeout52B-270
DTC U0154: occupant ECU CAN timeout52B-271
DTC U0155: combination meter CAN timeout52B-273
DTC U0164: A/ECU CAN timeout52B-274
DTC U0168: ECU or wcm CAN timeout52B-276
DTC U0170: front impact sensor (lh) communication error52B-277
DTC U0171: front impact sensor (rh) communication error52B-281
DTC U0172: side impact sensor (lh) communication error52B-284
DTC U0175: side impact sensor (rh) communication error52B-287
DTC U0184: audio CAN timeout52B-290
DTC U0195: satellite radio tuner CAN timeout52B-291
DTC U0197: hands free module CAN timeout52B-293
DTC U1414: defective coding data52B-294
DTC U1415: coding not completed/data fail52B-296
safe function reference table52B-368
Introduction to diagnosis52B-28
Passenger’s air bag off indicator light check52B-30
Passenger’s seat belt warning light check52B-30
SRS warning light check52B-30
Symptom procedures
Inspection procedure 1: communication between the scan tool and the ECU is not possible52B-358
Inspection procedure 2: power supply circuit system52B-359
Inspection procedure 3:the SRS warning light does not illuminate52B-362
Inspection procedure 4: the SRS warning light does not go out52B-365
Trouble symptom chart52B-357
Troubleshooting strategy52B-28
SRS control unit (SRS-ECU)
Inspection52B-385
Removal and installation52B-383
Stabilizer bar
Removal and installation
Front suspension33-17
Rear suspension34-28
Stabilizer link check
Front suspension33-18
Rear suspension34-29
Starting system
General information16-23
General specifications16-24
On-vehicle service
Starter relay check16-26
Service specifications16-24
Starter motor assembly
Disassembly and assembly16-30
Inspection
Engine electrical16-28
Engine electrical16-32
Removal and installation16-27
Starting system diagnosis16-24
Starting system (M/T)90-36
Starting system (sst)90-38
Steering column80B-5
Steering shaft
Disassembly and reassembly37-29
Removal and installation37-26
Steering wheel
Removal and installation37-22
Steering wheel audio remote control switch
Diagnosis
Standard flow of diagnostic troubleshooting54A-521
Trouble symptom chart54A-521
General information54A-519
Removal and installation54A-534
Special tools54A-520
Streering wheel audio remote control switch inspection54A-535
Symptom procedures
Inspection procedure 1: steering wheel audio remote control switch does not function. (vehicles with radio and cd player)54A-522
Inspection procedure 2: steering wheel audio remote control switch does not function. (vehicles with mmcs)54A-527
Inspection procedure 3: steering wheel audio remote control switch illumination does not come on54A-531
Steering wheel sensor
Removal and installation35C-279
Stoplight90-138
Strut assembly
Disassembly and reassembly33-11
Inspection
Front suspension33-11
Front suspension33-14
Removal and installation33-10
Strut tower bar
Removal and installation42A-15
Sunroof90-312
Sunroof
Check at ECU terminal42A-179
Diagnostic trouble code procedures
Code no. L0630 s/r power supply42A-153
Code no. L0632 s/r switch fail42A-155
Code no. L0634 s/r sensor signal42A-157
Code no. L0637 s/r position42A-157
Code no. L0640 s/r over load42A-158
General information42A-150
On-vehicle service
Learning procedures of the sunroof fully
closed position42A-183
Sunroof check42A-182
Sunroof fit adjustment42A-182
Sunroof lid glass operation current check42A-183
Sunroof operation check42A-184
Sunroof safety function check42A-182
Sunroof timer function check42A-182
Water test42A-181
Special tools42A-180
Specification(s)
Sealant42A-150
Service specification42A-150
Sunroof
Disassembly and assembly42A-190
Inspection42A-189
Sunroof assembly removal and installation42A-187
Sunroof diagnosis
Diagnostic trouble code chart42A-152
Trouble symptom chart42A-152
Troubleshooting strategy42A-152
Symptom procedures
Inspection procedure 1: sunroof does not work at all.42A-159
Inspection procedure 2: the sunroof lid glass does not up (down, open, and close normally).42A-164
Inspection procedure 3: the sunroof lid glass does not open (up, down, and close normally).42A-167
Inspection procedure 4: the sunroof lid glass does not down or close (up and open normally).42A-170
Inspection procedure 5: sunroof safety function does not work normally42A-173
Inspection procedure 6: the sunroof timer function does not work42A-175
Supplemental restraint system (SRS)90-266

T

Taillight, position light, license plate light and lighting monitor tone alarm90-116
Test equipment
Supplemental restraint system (SRS)52B-370
Controller area network (CAN)54C-6
Theft alarm
Diagnosis
Diagnostic function54A-685
Standard flow of diagnostic troubleshooting54A-685
General information54A-683
Inspection
alarm indicator check54A-706
Removal and installation54A-706
Special tools54A-684
Symptom procedures54A-688
Symptom procedures
Inspection procedure 1: the alarm is not armed (the alarm indicator does not illuminate)54A-688
Inspection procedure 2: the interior alarm does not work normally while the alarm is triggered54A-694
Inspection procedure 3: alarm horn does not sound while the alarm system is triggered54A-696
Inspection procedure 4: horn (high or low) does not sound while the alarm system is triggered54A-701
Trouble symptom chart54A-687
alarm system90-348
Thermostat
Inspection14-24
Removal and installation14-22
Throttle body
Removal and installation11B-14
Throttle body assembly
Removal and installation13A-918
Tightening torque00-54
Timing chain
Inspection11B-39
Removal and installation
Engine mechanical11A-69
Engine overhaul11B-34
Tire pressure monitoring system (TPMS)
Removal and installation31-8
Tire pressure monitoring system (TPMS) (M/T)90-290
Tire pressure monitoring system (TPMS) (sst)90-296
Torque specifications21B-2
Towing and hoisting00-48
TPMS transmitter
Removal and installation
Keyless operation system (kos)42B-285
Wireless control module (wcm)42C-131
Trailing arm
Removal and installation34-17
Trailing arm ball joint dust cover inspection34-19
Trailing arm ball joint dust cover replacement34-20
Trailing arm ball joint rotation starting torque check34-18
Trailing arm pillow ball bushing rotation torque check34-19
Transaxle22D-3
Transaxle
Disassembly and assembly
Manual transaxle overhaul22B-12
Twin clutch sst overhaul22D-3
Inspection22B-19
Transaxle adjustment22B-19
Transaxle (transmission) mounting
Removal and installation32-6
Transaxle assembly
Removal and installation
Manual transaxle22A-127
Twin sportronic shift transmission (sst)22C-341
Transaxle case
Disassembly and assembly22B-48
Transaxle control
Removal and installation22A-121
Transfer
Disassembly and assembly
Manual transaxle overhaul22B-56
Twin clutch sst overhaul22D-4
Transfer assembly
Removal and installation
Manual transaxle22A-125
Twin sportronic shift transmission (sst)22C-339
Transmission control
Removal and installation22C-334
Transmitter
Disassembly and assembly42C-129
Inspection42C-130
Trims
Removal and installation52A-11
Troubleshooting15-4
Troubleshooting
Diagnosis function54B-4
Diagnostic trouble code chart54B-5
Diagnostic trouble code procedures
DTC U0169: sunroof lin timeout (vehicles with sunroof)54B-6
DTC U0215: p/w sw (dr) lin timeout54B-9
DTC U0231: rain light sensor lin timeout (vehicles with auto light function)54B-12
DTC U1109: column sw lin timeout54B-14
DTC U150b: column sw checksum error54B-16
DTC U150c: p/w sw (dr) checksum error54B-17
DTC U1511: sunroof checksum error (vehicles with sunroof)54B-18
DTC U1512: rain light sensor checksum error (vehicles with auto light function)54B-19
DTC U1514: bit error (lin)54B-20
DTC U1515: bus activity error (lin)54B-22
Troubleshooting guidelines00-6
Trunk lid
On-vehicle service
Adjustment of clearance around trunk lid42A-145
Trunk lid height adjustment42A-146
Trunk lid striker adjustment42A-146
Special tools42A-145
Specification(s)
Sealant42A-143
Symptom procedures
Inspection procedure 1: difficult locking and unlocking42A-143
Inspection procedure 2: uneven body clearance42A-144
Inspection procedure 3: uneven height42A-144
Trouble symptom chart42A-143
Trunk lid
Inspection42A-149
Removal and installation42A-147
Trunk lid diagnosis
Introduction to trunk lid diagnosis42A-143
Trunk lid diagnostic troubleshooting strategy42A-143
Trunk lid opener90-184
signal light and hazard warning light90-130
Twin clutch sport shift transaxle (sst)90-82
Twin clutch sst control mode switch
Inspection22C-333
Inspection
Twin clutch sst control mode switch check22C-333
Removal and installation22C-333

U

Under cover
Removal and installation51-16
Upper arm assembly
Removal and installation34-21
Upper arm ball joint dust cover inspection34-22
Upper arm ball joint dust cover replacement34-22
Upper arm ball joint rotation starting torque check34-22
Upper arm pillow ball bushing rotation torque check34-22

V

Valve stem seal
Removal and installation11A-43
Vehicle identification
Chassis number00-19
Engine model stamping00-19
Models00-18
National safety mark (canada)00-20
Theft protection label00-21
Tire and loading information placard00-20
Vehicle identification code plate00-19
Vehicle identification number plate00-17
Vehicle safety certification label00-20
Ventilators
Removal and installation55-140

W

Water hose and pipe
Removal and installation11B-24
Water hose and water pipe
Inspection14-30
Removal and installation14-26
Water pump
Removal and installation14-25
Wcm
Removal and installation42C-128
Wheel and tire
Installation service point31-8
Wheel and tire diagnosis31-3
Wheel and tire diagnosis
Diagnosis31-3
Wheel balance accuracy31-4
Wheel speed sensor
Inspection35C-277
Removal and installation35C-274
Window glass
General information42A-16
Rear window glass
Removal and installation42A-24
Special tool42A-18
Specification(s)
Adhesives42A-15
Symptom procedures
Inspection procedure 1: water leak through windshield/rear window glass42A-18
Window glass diagnosis
Introduction to window glass diagnosis42A-17
Window glass diagnostic troubleshooting strategy42A-18
Window glass diagnostic trouble symptom chart42A-18
Windshield
Removal and installation42A-19
Windshield wiper and washer90-202
Windshield wiper and washer
Data list reference table51-64
General information51-19
Lighting control sensor
Adaptation51-76
Removal and installation51-76
On-vehicle service
Configuration function51-65
Lighting control sensor (rain sensor) inspection51-65
Windshield intermittent wiper interval check51-64
Special tools51-22
Symptom procedures51-25
Symptom procedures
Inspection procedure 1: the windshield wipers do not work at all51-25
Inspection procedure 10: the windshield washer does not work normally51-59
Inspection procedure 2: the windshield wipers do not work when the wiper switch is at the INT,washer or mist position. however, the wipers work at low speed when the switch is at the lo or hi position51-32
Inspection procedure 3: windshield wipers do not stop at the specified park position51-35
Inspection procedure 4: windshield wipers do not work normally51-38
Inspection procedure 5: the windshield intermittent wiper interval cannot be adjusted by operating the windshield intermittent wiper interval control switch51-44
Inspection procedure 6: the windshield intermittent wiper interval is not changed according to the vehicle speed51-46
Inspection procedure 7: the rain sensitive auto wiper function does not work at all (vehicles with lighting control sensor)51-48
Inspection procedure 8: the rain sensitive auto wiper function works even though there is no rainfall (vehicles with lighting control sensor)51-53
Inspection procedure 9: sometimes the rain sensitive auto wiper function works even though there is no rainfall ( vehicles with lighting control sensor)51-56
Windshield washer
Inspection51-73
Removal and installation51-72
Windshield wiper
Inspection51-70
Removal and installation51-66
Windshield wiper and washer diagnosis
Standard flow of diagnostic troubleshooting51-23
Trouble symptom chart51-23